REMAL Vinyl Color mat washable wall paint, 500 spring green, 3.2 kg

Washable wall paint REMAL Vinyl Color Mat is a premium colored washable paint with a velvety matte appearance, excellent coverage, and abrasion resistance. The surface of the paint is gently washable. The coating is intended for painting walls and ceilings in interiors on plaster, drywall, and other substrates.

The product is easy to apply, health-safe, and environmentally friendly. It demonstrates washability and wet abrasion resistance after 28 days - class 1. (measured according to ČSN EN ISO 11998, classified according to EN 13300). Application method: brush, paint roller.

Features of the washable wall paint REMAL:

• washable wall paint
• velvety matte
• washable paint class 1. ČSN EN ISO 11998, classified according to EN 13300
• extremely covering
• wide range of shades
• easy handling
• traditional Czech production
• environmentally friendly washable paint
• health-safe
• suitable for children's rooms

Approximate coverage of washable paint:

up to 12 m² /1 kg for one coat.

Technical properties of washable wall paint:

• substrate: plaster, drywall, and other substrates
• environment: interior
• dilution: water
• washability of paint class 1 - fully washable wall paint

Application procedure for washable paint:

Old, non-adhering coatings in thicker layers should be scraped off. Before painting, treat the surface with REMAL penetrating primer. This will remove dust, strengthen, unify absorbency, and ensure adhesion. Drying time is 4 hours. Even out imperfections on the wall with REMAL filler. For touching up stains, such as from water ingress, it's advisable to use REMAL Flek-stop sealing paint. Before use, thoroughly stir the paint, it is diluted for painting. If necessary, dilute with a maximum of 5% clean water. Apply with a REMAL Vinyl roller with short pile. The coating covers in one layer. Recoat after a minimum of 4 hours. The optimal temperature for application is 15 to 25 °C. Clean soiled areas and tools immediately after application with water; dried paint is difficult to remove.

Application method for washable wall paint:

Roller REMAL Vinyl with short pile, brush, spraying AIRLESS - e.g. STORCH AIRLESS ST 550, STORCH AIRLESS ST 700, or STORCH AIRLESS ST 800 recommended pressure from 120 – 150 bar, nozzle size 515 or 517, gun filter 50 mesh. When applying by spraying, we recommend always conducting tests on the specific equipment beforehand.

Handling of washable paint REMAL:

When working, follow basic hygiene rules. The product is not intended for coatings coming into direct contact with food, animal feed, drinking water, nor for coatings on children's toys and furniture. Keep out of reach of children. If you do not feel well, seek medical attention. The product is treated with a biocide. Contains a reactive mixture: 5-chloro-2-methylisothiazol-3(2H)-one [ES No. 247-500-7] and 2-methylisothiazol-3(2H)-one [ES No. 220-239-6] (3:1). May cause an allergic reaction.

You may find useful

covering materials, such as paper adhesive tape or covering foil, possibly sanding papers. Don't forget about brushes, rollers, spatulas, and putty knives.

Washability of paint in practice is governed by the standard WET ABRASION RESISTANCE ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining wet abrasion resistance and washability of paint. Regarding the cleanability of coatings, it only specifies the testing method itself but does not specify the soiling substances. After drying and conditioning, the painted sample is weighed and subjected to cleaning cycles in a wet testing abrasion (cleaning) device. From the weight loss, the average value of the thickness loss of the coating is calculated. For determining cleanability, the soiling substances are applied to similarly prepared samples. Specified soiling substances are left in contact with the coating film for a prescribed time. Painted, soiled samples are then subjected to cleaning cycles. It is evaluated whether the soiling substance was removed and the coating is resistant to wet abrasion.

For evaluation, 5 classes are used - class 1 is the best – class 5 is the worst.