REMAL Flek-stop water stain paint for stains from water, smoke, and nicotine 1 kg

How to remove stains from walls? REMAL Flek-stop will help you with that. Wall stains can be resolved with a basic covering coat. REMAL Flek-stop is a special water-based primer paint for walls for interiors and exteriors designed to isolate stains that would show on the surface when repainted with regular interior paint, primarily stains from leaking water, nicotine, smoke, etc.).

REMAL Flek-stop is recommended for isolating stains from leaking water, smoke, and nicotine on plaster, concrete, or drywall in both interiors and exteriors, which would surface when painted over with a regular coating. The paint is easy to use, non-toxic, and environmentally friendly

Properties of the stain blocking primer:

• for isolating stains from leaking water, smoke, and nicotine
• traditional Czech production
• scrub-resistant coating
• high covering capability
• non-toxic primer paint for walls
• environmentally friendly

Technical painter's paint for stains:

• compatible with REMAL painter's paints
• coverage up to 8 m²/1 kg in one coat
• primer paint for stainsfor drywall, interior plaster, concrete, walls, and ceilings
• water-based paint for stains
• application with a brush or roller
• viscosity 1200 - 1600 mPas (Brookfield HB DV 2+ 4/100)
• minimum volatile content 55%
• pH 7.5 – 8.5
• produced in non-standardized white shade

Example of the painting procedure for stain paint:

Before painting the wall, remove layers of old and non-adhering coatings. Treat absorbent substrates with REMAL universal primer, treat non-adhering and crumbling substrates with REMAL deep primer. This will free the surface from dust, strengthen it, unify absorbency, and ensure paint adhesion. Drying time is 4 hours. Dilute the paint with a maximum of 0.1 L of water for 1 kg of paint. Then mix thoroughly.

Apply with a brush or roller in 1 to 2 coats, applying the next coat after the previous one has dried, at least after 4 hours. The optimal temperature for application is 15 to 25 °C. Finally, repaint the covering coat with a paint from the REMAL range.

Handling with stain paint:

When working, follow basic hygiene rules. The product is not intended for coatings that come into direct contact with food, animal feed, drinking water, or for coatings of children's toys and furniture. The product is treated with a biocide. It contains a reactive mixture: 5-chloro-2-methylisothiazol-3(2H)-one [EC number 247-500-7] and 2-methylisothiazol-3(2H)-one [EC number 220-239-6] (3:1). It may cause an allergic reaction.

Storage life of REMAL Flek-stop stain paint:

The product retains its utility properties for 5 years from the date of manufacture, in the original unopened packaging. Store in a dry place at a temperature of 5 to 25 °C.

Disposal of packaging and waste:

Dispose of packaging with product residues at a location designated by the municipality for collecting other waste. See also Section 13 of the product safety data sheet

You may find it useful to have protective materials, such as paper adhesive tape or protective film, or sanding papers. Don't forget brushes, rollers, scrapers, and spatulas.