REMAL Telsal stain neutralizing salt V2026, 1 kg

Neutralizing salt for wall stains. The agent is designed to neutralize fresh dried plasters against efflorescence of water-soluble salts and lime from the plaster and to remediate colored stains from smoke, nicotine, and water damage. The agent can be used under painting preparations and dispersion facade paints.

The agent is not toxic, but is not intended for direct contact with food, animal feed, and drinking water. It has astringent effects on unprotected skin and solutions of higher concentrations can be corrosive. In case of accidental ingestion, it may cause burns to the digestive tract. Adhere to personal hygiene principles. Do not eat, drink, or smoke while working. After working with the agent, wash your hands with water and soap.

Properties of the stain remedy:

• for water stains on walls
• neutralizes fresh plasters
• removes stains from water damage, smoke, and nicotine
• can be used under painting preparations and dispersion facade paints
• substrate plaster
• environment interior and exterior
• dilution water for dissolving
• application method Brush, paintbrush
• packaging 1 kg

Approximate coverage:

up to 150 to 200 g/m2 of dissolved preparation for one coat.

Working procedure for stain preparation:

Before using the stain agent, the surface must be free from loose parts, dust, grease and must be dry. Old coatings in thicker layers must be scraped off. REMAL TELSAL V2026 is dissolved in the ratio of 1 kg in 5 l of water and this prepared solution is applied to the treated surfaces.

In case of swelling of old coatings (especially painter's paints, etc.), they must be cleaned before the next coat. Always use only as much of the preparation solution as to avoid dripping and creating shiny, hard-to-repaint areas with an excess of REMAL TELSAL V2026! In this case, swelling of upper coats may occur. After the treated or cleaned surface has dried, it is possible to apply regular painter's preparations, dispersion or silicone facade paints in the usual manner. It is not suitable to use under silicate facade paints.

Storage of stain preparation:

The product retains its utility properties for 5 years from the date of manufacture, in its original unopened packaging. Store in a dry place at a temperature of 5 to 25 °C.

Product safety warnings (H-statements)

• H314: Causes severe skin burns and eye damage.
• H318: Causes serious eye damage.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310+P331: IF SWALLOWED: Immediately call a TOXICOLOGICAL INFORMATION CENTRE/doctor/DO NOT induce vomiting.
• P303+P361+P353: IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water/shower.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a TOXICOLOGICAL INFORMATION CENTRE/doctor