REMAL Sanal Anti-Mold for Walls and Fungi V1406, 900 g

Remal Sanal for masonry for remediation and preventive protection of masonry, plasters, stone, concrete, and other building materials against mold and fungi. An aqueous solution of quaternary ammonium salt with added marking dye and special additive. The product does not contain organic solvents or heavy metals.

Properties of REMAL Sanal anti-mold coating:

• effectively resolves mold on walls
• concentrate for disinfection and elimination
• protects against mold and fungi
• effective disinfectant
• clear liquid colored with an indicator dye

Yield of REMAL Sanal for mold on walls:

up to 70 m² /1kg of diluted solution for one coat.

Technical properties of the anti-mold product

• anti-mold coating
• application with a brush or roller
• diluent water
• substrate masonry, plasters, stone, concrete, and other building materials
• environment interior and exterior
• dilution of anti-mold coating 1:9, for brick masonry 1:5

Procedure for anti-mold coating:

Areas infested with mold should be secured against moisture from infiltration and isolation against rising water. Before using the anti-mold coating REMAL Sanal, dilute it with water in a ratio of 1:9; for treating brick masonry against mold, REMAL Sanal is diluted with water in a ratio of 1:5.

Mold-infested areas are to be coated with the diluted solution and the mold is to be mechanically removed while wet, for example with a spatula. After drying, the coating with the diluted solution is repeated 1-2 times. After the treated surface dries in the interior, it is advisable to apply a painter's product with an anti-mold additive (e.g., REMAL anti-mold paint). After drying, the technological properties of the treated surface after the application of painter's products and facade coatings do not change.

Content of active components in anti-mold penetration:

N-alkyl (C12-16) (benzyl) dimethylammonium chloride (ES 270-325-2): min. 190 g/kg of product.

Warning for anti-mold coating:

Use biocidal products safely. Always read the label and product information before use.

Handling:

May be harmful to health if ingested, inhaled, or comes into contact with skin and mucous membranes. Irritates skin, eyes, and respiratory tract. Keep out of reach of children and uninformed persons. Use in well-ventilated areas. Must not be used other than as instructed. Must not be used on coatings coming into direct contact with food, animal feed, and drinking water, or for coatings of materials used to manufacture children's toys and furniture.

Safety warnings for the product (H-phrases)

• H314: Causes severe skin burns and eye damage.

Instructions for safe handling (P-phrases)

• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P330+P331: IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
• P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
• P310: Immediately call a TOXICOLOGICAL INFORMATION CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container according to product instructions.