Interior paint with added anti-fungal biocide is designed mainly for places with insufficient air circulation and increased humidity, such as basements or bathrooms, where there is a higher risk of mold formation.
Yield:
6 - 10 m²/kg in one layer depending on the structure and absorbency of the substrate and the thickness of the applied layer. Minimum drying time is 4 hours at 20 °C and relative humidity of 60 %.
Usage:
For interior coatings of walls and ceilings, lime, lime-cement, gypsum-lime, and gypsum plasters, drywall, fiberboard, and wood fiber boards, plasters with an acrylic binder, restoration plasters, concrete panels and monoliths, designated paper wallpapers, fiberglass wallpapers, etc. Also for application on substrates combining, for example, mineral plasters and drywall. The paint is treated with a biocidal agent, and its coating film is better protected against mold compared to standard paints.
The paint is primarily used in poorly ventilated interiors with increased humidity, typically in basements or bathrooms, where mold presence is a risk. After application, it leaves a matte and highly vapor-permeable layer that is abrasion-resistant when dry, meeting the requirements of WTA CZ directive no. 2-9-04/D, table 4, limiting the application of covering coatings on restoration plasters in terms of permeability for water vapor. The paint complies with regulations for surfaces in indirect contact with food (such as walls in dining rooms, kitchens, or food storage), but must not be used on surfaces intended for direct contact with food. The coating must not be exposed to permanent water action or condensate moisture. The dried film can withstand short-term thermal exposure up to around 70 °C.
Application:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large area application – by spraying AIRLESS, HVLP. When spraying, it is advisable to conduct tests on specific equipment beforehand.
Warning:
When applying indoors during application and drying, ensure thorough ventilation. Rinse affected eyes with water. If discomfort occurs, seek medical attention. If swallowed, rinse mouth with water. Wash contaminated skin with water and soap.
Warning:
Use biocidal products safely. Always read the label and product information before use.