Het Brillant R wood fiber-filled structural paint according to the roller, decorative dispersion interior paint, 5 kg

Het Brillant R is a white interior paint filled with wood fibers designed for structural coatings of walls, lime, lime-cement, gypsum-lime and gypsum plasters, drywall, fibrous gypsum and wood-fiber boards, concrete panels, and monoliths, etc. It is also suitable for application on substrates with a combination of e.g. mineral plasters and drywall. The paint can also be used on suitably prepared non-absorbent substrates (e.g. umakart, sololit). The coating creates a structural surface with a rustic appearance, achieved by the fillers used and the type of paint roller. The product meets the requirements for coatings of surfaces that may come into indirect contact with food. The coating creates a matte, vapor-permeable surface that is resistant to standard humidity in rooms. The painted surface should not be in constant contact with water and should not be exposed to condensing moisture. The dried coating can briefly withstand temperatures of around 70 °C.
Paint is suitable for painting

Usage:
For coatings of plasters, masonry, drywall, fibrous, chipboard, and wood-fiber boards, concrete panels, and monoliths, smooth wallpapers intended for repainting, etc. It can also be applied to prepared non-absorbent substrates (e.g. umakart or sololit). The structure of the coating surface is achieved by the type of filler used.

Shade:
white, tinting can be done with HETCOLOR tinting colors (max. in the ratio of 1:8 parts color) or KOLORKA tinting preparations (max. in the ratio of 1:20). If a richer shade is required, first apply a decorative paint tinted in the maximum allowed mixing ratio, and then cover with a smooth interior paint in the desired final shade.

Coverage:
1.5 – 3.0 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.

Application:
with a polyacrylic knitted or woven roller

Application procedure:
1. Any separation of the transparent material on the surface of the paint is not a defect, mix thoroughly before use.
2. For low-absorbency and extremely smooth substrates (drywall, gypsum finishes, etc.), the priming coat is done with a penetrating product UP-GRUND, for very absorbent substrates with products A-GRUND or AT-GRUND. If the substrate is a non-dusting, low-absorbent original coating film, priming is not necessary. Layers of old
coatings with insufficient adhesion are recommended to be scraped off.
3. After the priming coat has dried, apply 1 covering coat with the properly mixed slightly diluted (max. 0.2 liters of water per 15 kg of paint) decorative paint BRILLANT-R. Apply the paint to the wall in “V” or “tree” strokes, not in parallel stripes to avoid the creation of boundary strips from the wood fibers contained.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have the product container or label at hand.
• P102: Keep out of reach of children.
• P501: Dispose of contents/container in accordance with the instructions on the product.