Het Hetcolor paint toning color, 0100 white, 1 kg

Hetcolor acrylic toning paint for toning facade and interior dispersion as well as classic coatings or for direct application. Dispersion toning matte paint for interior and exterior use. For toning water-soluble dispersion and classic paints intended for wall and ceiling coatings or for direct application on interior and exterior lime, lime-cement plasters, plasters with acrylic binders, masonry, etc. It can also be used for decorative coatings of vertical concrete structures. In cases where substrates are not exposed to rainwater and applied indoors, the paint can be used for decorative coatings of chipboard, fiberboard, drywall or cement board, gypsum or gypsum-lime plasters, paper, wallpaper, etc.

The product is suitable for coatings of surfaces that may come into indirect and direct incidental contact with food. The dried coating temporarily withstands temperatures around 70 °C. Long-term exposure to high temperatures may negatively affect technical parameters, weather resistance, and color stability. Full shades with a light reflectance index HBW (Y) lower than 30 are not suitable for coatings of contact thermal insulation systems. The coated surface must not be in permanent contact with water. It cannot be used for toning solvent-based, lime, and silicate paints and for coloring cement mixtures.

For indoor and outdoor use, also suitable for direct application. Matte appearance, wet abrasion resistance, long-lasting color stability, significant coverage ability.

Shades:
white and 21 color shades, individual shades can be combined

Yield:
6 - 10 m² /kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer

Procedure for toning:
First, the contents of the package should be thoroughly shaken. In the chosen mixing ratio, the toning paint is gradually mixed into the white coating material. Care should be taken during mixing to avoid foaming of the paint. Only after toning the chosen shade, if necessary, the paint can be diluted with water according to the instructions of the manufacturer of the tinted coating material.
When toning paints from other manufacturers, it is recommended to first test compatibility with the specific coating material.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P501: Dispose of contents/container in accordance with product instructions.