Het Hetline San Active antifungal paint, 7 kg

Interior paint treated with a biocidal agent against mold is recommended for rooms with higher humidity and poor ventilation, e.g., bathrooms, basements, etc., where there is a higher risk of mold formation.

• higher resistance to mold
• suitable for coatings on renovation plasters
• high whiteness 95 % (MgO)
• abrasion resistance when dry
• excellent vapour permeability
• significant hiding power and spreadability

Coverage:
6 - 10 m²/kg in one layer, depending on the absorbency and structure of the substrate and the thickness of the applied layer. Drying time is at least 4 hours at 20 °C and 60 % relative humidity.

Usage:
For indoor wall and ceiling coatings, lime, lime-cement, gypsum-lime and gypsum plasters, plasterboards, fibreboards and wood-fibre boards, plaster with acrylic binder, renovation plasters, concrete panels and monoliths, designated paper wallpapers, glass fibre wallpapers, etc. Also suitable for application on substrates combining, for example, mineral plaster and plasterboard. The paint is treated with a biocidal agent, and its coating film is thus better protected against mold compared to ordinary paints.

The paint is suitable for rooms with higher humidity and poor ventilation, e.g., bathrooms, basements, etc., where there is a risk of mold formation. The coating creates a matte, highly vapour-permeable surface resistant to abrasion by dry substances, meeting the requirements of WTA CZ Directive No. 2-9-04/D, Table 4, which limits the use of covering layers on renovation plasters in terms of vapour permeability. The product meets the requirements for coatings on surfaces that may come into indirect contact with food (coatings on the walls of food storage areas, canteens, kitchens, etc.), but must not be used on surfaces that are in direct contact with food. The painted surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can withstand temperatures around 70 °C for a short period.

Application:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large area application – spraying AIRLESS, HVLP. When spraying, it is advisable to carry out tests on the specific equipment beforehand.

Warning:
When applying indoors during application and drying, ensure proper ventilation. Rinse affected eyes with water. If difficulties arise, seek medical attention. If swallowed, rinse mouth with water. Wash contaminated skin with water and soap.

Warning:
Use biocidal products safely. Always read the label and product information before use.

Safety warnings of the product (H-phrases)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• H412: Harmful to aquatic life with long-lasting effects.

Precautions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapours/aerosols.
• P270: Do not eat, drink or smoke when using this product.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P501: Dispose of contents/container in accordance with local regulations.