
Hetcolor acrylic tinting paint is designed for tinting interior and exterior dispersion and traditional painting coatings or for direct use. It is a matte dispersion paint for outdoor and indoor spaces. It serves for tinting water-based classic and dispersion paints for ceilings and walls, or for direct application on interior and exterior lime and lime-cement plasters, plasters with acrylic binders, masonry, and similar surfaces. You can also use it for decorative coatings on vertical concrete surfaces. For substrates protected from rain and indoor work, the paint can also be applied for decorative coating of chipboard, drywall, fiberboard, or gypsum-fiber boards, gypsum-lime and gypsum plasters, wallpapers, paper, etc.
The product meets the requirements for coatings that may come into indirect and occasional direct contact with food. After curing, the coating can withstand short-term thermal loads of around 70 °C. However, prolonged exposure to higher temperatures may adversely affect the technical properties, resistance to weather influences, and color fastness. Intense shades with a light reflectance index HBW (Y) below 30 are not recommended for application on contact insulating systems. The painted substrate must not remain in permanent contact with water. The product is not intended for coloring cement mixes or for tinting lime, silicate, and solvent-based coatings.
Suitable for indoor and outdoor environments, including direct application. It offers a matte finish, high covering capacity, resistance to wet abrasion, and long-term color stability.
Shades:
white and 21 color shades, with individual variants being mixable among themselves
Coverage:
6 - 10 m² /kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer
Procedure for tinting:
First, shake the contents of the packaging thoroughly. In the chosen mixing ratio, the tinting paint is gradually mixed into the white coating material. During mixing, care should be taken to avoid foaming the paint. Only after tinting the chosen shade should the paint be diluted with water if necessary according to the manufacturer's instructions for the tinted coating material.
When tinting paints from other manufacturers, it is recommended to first test compatibility with the specific coating material.
| Species: | ostatní |