
Hetcolor acrylic tinting color is used for coloring facade and interior dispersion and classical coatings, or it can be applied directly. It is a matte dispersion tinting color suitable for both indoor and outdoor environments. You will use it to tint water-based dispersion and traditional coatings for walls and ceilings or for directly painting external and internal lime and lime-cement plasters, plasters with acrylic binder, masonry, and similar surfaces. It is also suitable for decorative coatings of vertical concrete surfaces. In interiors and on substrates protected from rainwater, it can also be used for decorative coatings of particle board, fiberboard, gypsum fiberboards, and plasterboard, gypsum, and plaster-lime plasters, wallpaper, or paper.
The product meets the requirements for coatings on surfaces that may come into indirect or accidental direct contact with food. The cured coating can withstand short-term temperature exposure around 70 °C. However, prolonged exposure to high temperatures may adversely affect color stability, weather resistance, and technical parameters. Intense shades with a light reflectance index HBW (Y) below 30 are not suitable for application on contact thermal insulation systems. The treated surface must not be permanently exposed to water. The product cannot be used for tinting solvent-based, silicate, or lime coatings and is not intended for coloring cement mixtures.
Suitable for outdoor and indoor use, with the possibility of direct application. Matte appearance, wash resistance when wet, long-term color stability, high opacity.
Colors:
white and 21 color shades, with individual variants being able to be mixed freely
Coverage:
6 - 10 m² /kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer
Tinting procedure:
First, shake the contents of the package thoroughly. In the chosen mixing ratio, the tinting color is gradually mixed into the white coating material. Care should be taken during mixing to avoid foaming of the color. Only after tinting the chosen shade should the color be diluted with water if necessary, according to the manufacturer's instructions for the tinted coating material.
When tinting colors from other manufacturers, it is recommended to first test compatibility with the specific coating material.
| Species: | ostatní |