
Het Klasic Color paint toned dispersive abrasion-resistant color that we recommend for living and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces. Suitable for coatings of mineral, plaster and remedial plasters, brick, concrete panels and monoliths, drywall, fiber-cement and wood-fiber boards, intended paper wallpapers, glass fiber wallpapers, etc.
Immediate application of the toned color, strong coverability and spreadability, matte appearance, resistance to abrasion in dry conditions, excellent vapor permeability, suitable for coatings of remedial system plasters. 16 color shades.
Usage of Het Klasic Color:
For interior wall and ceiling coatings, lime, lime-cement, gypsum-lime and gypsum plasters, drywall, fiber-cement and wood-fiber boards, acrylic binder plasters, remedial plasters (meets the requirements of WTA CZ directive No. 2-9-04/D, table 4 limiting the use of coating layers on remedial plasters in terms of permeability for water vapor), concrete panels and monoliths, intended paper wallpapers, glass fiber wallpapers, etc. Also for application on substrates with a combination of, for example, mineral plasters and drywall. The product meets the requirements for painting surfaces that may come into indirect and direct incidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard humidity in rooms and resistant to abrasion with dry material.
The coated surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can withstand short-term temperatures of around 70 °C. The color is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces, etc.
Color coverage of Het Klasic Color:
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and thickness of the applied layer.
Application of Het Klasic Color:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large area application – by AIRLESS spraying, HVLP. When spraying, it is advisable to conduct tests on specific equipment beforehand.
Substrate:
Dry, cohesive, free of dirt and biological infestation (mold, algae), not salted, non-greasy, free of formwork oils, chemically stable, mature (pH ≤8.5; control can be performed with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must be between +5 to +30 °C during application and for 24 hours after application.
Application procedure:
You may need:
Brushes, small brushes, rollers, abrasives, covering materials, spatulas, knives, buckets, and trays.
| Species: | ostatní |