
Het Klasic Color paint tinted dispersion resistant color that we recommend for living and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces. Suitable for painting mineral, plaster and remedial plasters, brickwork, concrete panels and monoliths, plasterboard, fiberboard and wood fiber boards, specifically designed paper wallpapers, fiberglass wallpapers, etc.
Immediate application of tinted color, strong coverage and spreadability, matte appearance, resistance to abrasion when dry, excellent vapor permeability, suitable for painting the plasters of remedial systems. Available in 16 color shades.
Usage of Het Klasic Color:
For internal wall and ceiling coatings, lime, lime-cement, gypsum-lime and gypsum plasters, plasterboard, fiberboard and wood fiber boards, acrylic binder plasters, remedial plasters (meets the requirements of WTA CZ directive No. 2-9-04/D, table 4 limiting the use of covering layers on remedial plasters from the perspective of vapor permeability), concrete panels and monoliths, specifically designed paper wallpapers, fiberglass wallpapers, etc. Also suitable for application on substrates combining e.g. mineral plasters and plasterboard. The product meets the requirements for coatings on surfaces that may come into direct and indirect accidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard moisture in rooms and to abrasion from dry materials.
The coated surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can withstand temperatures of around 70 °C for a short time. The color is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces, etc.
Paint yield Het Klasic Color:
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Applying Het Klasic Color:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large area application – by AIRLESS spraying, HVLP. When spraying, it is advisable to carry out tests on particular equipment beforehand.
Substrate:
Dry, cohesive, free of dirt and biological attack (mold, algae), non-saline, non-greasy, free of formwork oils, chemically stable, mature (pH ≤8.5; control can be performed using a pH tester).
Application temperature:
The temperature of the mass, environment, and substrate must be between +5 and +30 °C during application and up to 24 hours after application.
Application procedure:
You might need:
Brushes, rollers, abrasive materials, covering materials, spatulas, knives, buckets, and trays.
| Species: | ostatní |