
Het Klasic Color is a tinted dispersion wear-resistant paint designed for living and commercial spaces, children's rooms, dining rooms, corridors, offices, and shops. It is suitable for coatings on mineral, plaster, and renovation plasters, masonry, concrete panels and monoliths, plasterboard, fiber-reinforced or wood-fiber boards, designated paper wallpapers and glass fiber wallpapers, etc.
The tinted paint is ready for immediate application, has high coverage and easy spreadability, a matte finish, resistance to dry abrasion, excellent vapor permeability, and suitability for renovation system plasters. Available in 16 color shades.
Use of Het Klasic Color:
For indoor wall and ceiling coatings, lime, lime-cement, plaster-lime, and gypsum plasters, plasterboard, fiber-reinforced and wood-fiber boards, plasters with acrylic binder, renovation plasters (meets the requirements of WTA CZ directive No. 2-9-04/D, table 4 limiting the use of covering layers on renovation plasters from the perspective of permeability for water vapor), concrete panels and monoliths, designated paper wallpapers, glass fiber wallpapers, etc. Also suitable for application on substrates combining, for example, mineral plasters and plasterboard. The product meets the requirements for coatings on surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard humidity in rooms and abrasion by dry materials.
The coated surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can temporarily withstand temperatures around 70 °C. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, corridors, offices, sales areas, etc.
Coverage of paint Het Klasic Color:
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Application of Het Klasic Color paint:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large-scale application – by AIRLESS or HVLP spraying. When spraying, it is advisable to conduct tests on specific equipment in advance.
Substrate:
Dry, cohesive, free of dirt and biological attack (mold, algae), unsalted, non-greasy, free of formwork oils, chemically stable, aged (pH ≤8.5; control can be done with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must range from +5 to +30 °C during application and for 24 hours after application.
Application procedure:
You might need:
Brushes, rollers, sandpaper, covering materials, knives, spatulas, trays, and buckets.
| Species: | ostatní |