Het Klasik Color painter's paint, 0618 intense yellow, 4 kg

Het Klasic Color represents a painted tinted dispersion wear-resistant paint intended for living and commercial spaces, children's rooms, dining rooms, hallways, offices, or stores. It can be used for painting mineral, plaster, and renovation plasters, masonry, concrete panels, and monoliths, gypsum boards, fiberboards, suitable paper wallpapers, and fiberglass wallpapers.

The tinted paint is ready for immediate application, high coverage, and easy spreading, matte finish, resistance to dry abrasion, excellent vapor permeability, suitable for plasters of renovation systems. Available in 16 color shades.

• new collection of 36 shades
• immediate application of tinted paint
• perfect workability
• great coverage and easy application
• matte appearance
• resistance to dry abrasion
• excellent vapor permeability
• can also be applied to renovation system plasters

Application of Het Klasic Color:

For interior coatings of walls and ceilings, lime, lime-cement, gypsum-lime, and gypsum plasters, gypsum boards, fiberboards, and wood fiberboards, plasters with acrylic binder, renovation plasters (meets the requirements of the WTA CZ directive no. 2-9-04/D, table 4 limiting the use of cover layers on renovation plasters in terms of vapor permeability), concrete panels and monoliths, specifically designated paper wallpapers, fiberglass wallpapers, etc. Also for application on substrates that combine, for example, mineral plasters and gypsum board. The product meets the requirements for coatings of surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor-permeable surface resistant to standard humidity in rooms and resistant to abrasion with dry materials.

The painted surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating will short-term withstand temperatures around 70 °C. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, sales areas, etc.

Color yield Het Klasic Color:
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.

Application of Het Klasic Color:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large-area application – by AIRLESS, HVLP spraying. When spraying, it is advisable to conduct preliminary tests on specific equipment.

Substrate:
Dry, cohesive, free from impurities and biological contamination (mold, algae), unsalted, non-greasy, free from formwork oils, chemically stable, matured (pH ≤8.5; control can be performed with a pH tester).

Application temperature:
The temperature of the material, environment, and substrate must be between +5 and +30 °C during application and for 24 hours after application.

Application procedure:

1. A priming coat is applied with paint diluted with a maximum of 0.3 liters of water per 1 kg of paint, or with a primer A-GRUND or AT-GRUND; for gypsum board and other low-absorbent or extremely smooth substrates, use the primer UP-GRUND. If the substrate is a non-pulverizing, low-absorbent original coating film, priming is not necessary. Layers of old coatings with insufficient adhesion should be scraped off.
2. After the priming coat has dried, apply 1–2 top coats of paint diluted with a maximum of 0.1 liters of water per 1 kg of paint. For new or significantly different underlying shades, more top coats may be applied as needed.

You might need:
Brushes, rollers, abrasives, covering materials, spatulas, knives, buckets, and trays.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P501: Dispose of contents/container according to product instructions.