
Het Klasic Color paint tinted dispersion wear-resistant paint that we recommend for living and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces. Suitable for painting mineral, plaster and renovation plasters, masonry, concrete panels and monoliths, drywall, fiberboard, and wood fiberboards, as well as specially designed paper wallpapers, glass fiber wallpapers, etc.
Immediate application of the tinted paint, high covering capability and spreadability, matte finish, resistance to abrasion when dry, excellent vapor permeability, suitable for painting renovation system plasters. 16 color shades.
Usage of Het Klasic Color:
For interior painting of walls and ceilings, lime, lime-cement, gypsum-lime and gypsum plasters, drywall, fiberboard and wood fiberboards, plasters with acrylic binders, renovation plasters (meets the requirement of WTA CZ directive No. 2-9-04/D, table 4 limiting the use of covering layers on renovation plasters concerning permeability to water vapor), concrete panels and monoliths, specially designed paper wallpapers, glass fiber wallpapers, etc. Also suitable for application on substrates combined with e.g. mineral plasters and drywall. The product meets the requirements for coating surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard humidity in rooms and dry abrasion.
The coated surface must not be in permanent contact with water and must not be exposed to condensing humidity. The dried coating can withstand temperatures of around 70 °C for a short time. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces, etc.
Paint Coverage of Het Klasic Color:
6 – 10 m²/kg in one coat depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Application of Het Klasic Color:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large-area application – by AIRLESS, HVLP spraying. When spraying, it is advisable to carry out preliminary tests on specific equipment.
Substrate:
Dry, cohesive, free of dirt and biological contamination (molds, algae), unsalted, non-greasy, free of formwork oils, chemically stable, matured (pH ≤8.5; control can be done with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must be between +5 and +30 °C during application and within 24 hours after application.
Application procedure:
You might need:
Brushes, rollers, abrasives, covering materials, spatulas, knives, buckets, and trays.
| Species: | ostatní |