
Het Klasic Color paint in tinted dispersion, abrasion-resistant is recommended for living and commercial spaces, children's rooms, dining rooms, hallways, offices, and retail spaces. Suitable for coating mineral, gypsum, and renovation plasters, masonry, concrete panels and monoliths, drywall, fiber cement, and wood fiber boards, paper wallpapers intended for this purpose, fiberglass wallpapers, etc.
Immediate application of tinted paint, excellent covering ability and spreadability, matte appearance, resistance to dry abrasion, excellent water vapor permeability, suitable for coatings of renovation plaster systems. 16 color shades.
Usage of Het Klasic Color:
For interior coatings of walls and ceilings, lime, lime-cement, gypsum-lime and gypsum plasters, drywall, fiber cement, and wood fiber boards, plasters with acrylic binders, renovation plasters (meets the requirements of WTA CZ guideline no. 2-9-04/D, table 4 limiting the use of covering layers on renovation plasters in terms of permeability to water vapor), concrete panels and monoliths, paper wallpapers intended for this purpose, fiberglass wallpapers, etc. Also suitable for application on substrates combining, for example, mineral plasters and drywall. The product meets the requirements for coatings of surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard humidity in rooms and dry abrasion.
The coated surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coat can withstand temperatures of around 70 °C for a short time. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces, etc.
Paint yield Het Klasic Color::
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Application of Het Klasic Color:
Recommended application – using paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large area application – spraying AIRLESS, HVLP. When spraying, it is advisable to perform tests on the specific device in advance.
Substrate:
Dry, cohesive, free of dirt and biological contamination (molds, algae), unsalted, non-greasy, free from formwork oils, chemically stable, matured (pH ≤8.5; control can be performed with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must be between +5 and +30 °C during application and for 24 hours afterward.
Application procedure:
You may find useful:
Brushes, rolling brushes, abrasive materials, covering materials, spatulas, knives, buckets, and containers.
| Color: | Shades of Blue |
| Species: | ostatní |