Bakrylex V1302 universal gloss water-based wood varnish, colorless, 600 g

BAKRYLEX UNIVERSAL VARNISH is a water-based acrylic colorless varnish intended for indoor varnishing of hardwood and softwood, furniture parts, wooden and cork coverings, plywood, etc. The varnish can also be used as a topcoat over water-based paints. It meets the requirements of ČSN EN 71-3, Part 3: Safety of toys. Migration of certain elements.

Properties of the universal wood varnish:

• ecological
• fast-drying
• decorative
• certificate for children's furniture and toys
• for indoor use

Instructions for use:

The dry wooden surface should be well sanded with sandpaper P80–150 and dust-free, then primed with varnish diluted with water in a ratio of 1:1 or with a suitable acrylic primer, e.g. REMAL UNIVERSAL PRIMER. After 2 hours of drying, lightly sand the primed surface with sandpaper P220–400 and remove the dust. Before use, thoroughly mix the varnish and apply 2–3 coats of undiluted varnish using a brush, roller, or by spraying at intervals of about 4 hours. The finished coat dries to dust within 4 hours and reaches final hardness after 48 hours. The temperature of the environment and materials during application must not drop below 10 °C.

Recommended application methods:

Brush, roller, spraying

Coverage:

8 - 12 m² /kg for one coat.

Drying:

Dust-free drying within 4 hours. The varnish achieves the desired properties within 48 hours.

Handling:

When working, follow basic hygiene rules. The product is not suitable for coatings that come into direct contact with food, feed, and drinking water. Keep out of reach of children. If you feel unwell, seek medical assistance. The product contains a biocide. It contains a reaction mixture: 5-chloro-2-methylisothiazol-3(2H)-one [ES number 247-500-7] and 2-methylisothiazol-3(2H)-one [ES number 220-239-6] (3:1). It may cause an allergic
reaction.

Storage stability:

The product retains its useful properties for 5 years from the date of manufacture in the original unopened packaging. Store in a dry warehouse at a temperature of 5 to 25 °C.

Disposal of packaging and waste:

Dispose of used, properly emptied packaging at a collection point for packaging waste. Packaging with residues of the product should be disposed of at a site designated by the municipality for hazardous waste disposal or handed over to a person authorized to handle hazardous waste. Also, refer to the safety data sheet of the product.