Lazurol Classic S1023 thin-film wood stain with oil content, 0080 mahogany, 9 l

Synthetic oil penetrating stain

CHARACTERISTICS AND USE:

Wood stain S1023 is designed for protective staining of soft and hardwood exposed to weather conditions as well as for interior applications. It protects wood from the effects of UV radiation. It contains natural oil. The wood stain deeply penetrates the structure of the wood, enhancing its natural grain and thus providing highly effective coatings. It features very easy renewability of the old coat. Shade 0000 - colorless is intended for indoor use only!!

Examples of use: garden furniture, wooden gables, ceilings, wall and ceiling cladding, fences, cabins and wooden houses, windows, doors, cork, penetration of wooden floors.

Key properties:

• contains natural oils
• deeply penetrates into the structure of the wood
• enhances natural grain
• excellent protection for soft and hardwood

PREPARATION OF THE SUBSTRATE:

The wood must be clean, dry, well-sanded, with a maximum moisture content of 12%, and free from residues of resins prior to application. Wood with a high resin content (larch, pine) must be pre-treated to remove all resin exudates, for example by washing with BALTECH C6000 thinner. The quality of the wood pre-treatment affects the overall appearance of the final finish and the lifespan of the coating system.

The surface of the wood intended for outdoor use must first be treated with a suitable fungicidal impregnation that provides protection against mold, fungi, and insects, for example, using LAZUROL IMPREGNATION BASE S1033. The surface of the wood intended for indoor use is best treated first with colorless stain LAZUROL CLASSIC S1023. The penetration of colorless impregnator ensures uniform absorbency of the substrate before applying the coating materials. Subsequently, the surface of the wood must be sanded with fine sandpaper and only then should the penetrating stain be applied. In renovation coatings, the wood must be stripped of the old, non-adherent layer, for example, by sanding.

DILUTION: thinner BALTECH S6006 (especially for cleaning tools)

Theoretical yield: 8 - 10 m²/l per coat depending on the absorbency of the substrate

WORKING PROCEDURE:

Apply with a brush after thorough mixing on the pre-prepared substrate. The stain does not need to be diluted as it is already at the application viscosity. During work, the stain must be regularly mixed. For indoor use, apply in 1 to 2 coats; for outdoor applications, it is advisable to use three coats, but only in colored shades. Colorless stain is intended for indoor applications. Individual coats can be applied at intervals of 24 hours. To evenly highlight the wood grain, it is advisable to wipe off any unabsorbed stain after 10 to 15 minutes using a dry brush or cloth.

For cohesive areas, always use material from the same production batch. Using the same production batch ensures the same color shade. The type, surface, and previous coat of wood influence the final color of the coating, which is why it is recommended to conduct a test application before the final application. Complaints about color shades will only be recognized if the complaint is made regarding the test area.
For high gloss, the dried coat done with LAZUROL CLASSIC S1023 can be overcoated with LAZUROL UNIVERSAL VARNISH S1002 or with the natural shade of stain LAZUROL GOLD S1037. Floors can be overcoated with LAZUROL OUTDOOR WALKABLE VARNISH S1020.

Warning: Absorbent materials (rags, sawdust, paper, dust, etc.) soaked in stain must be safely disposed of as they can self-ignite under certain circumstances.

You might need covering materials, such as paper adhesive tape or covering film. Don't forget brushes and rollers.

Product safety warning (H-phrases)

• EUH066: Repeated exposure may cause drying or cracking of the skin.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P403: Store in a well-ventilated place.
• P501: Dispose of contents/container in accordance with product instructions.