Lazurol Gold S1037 opaque wood stain T000 colorless, 750 ml

Synthetic thixotropic wood stain.

CHARACTERISTICS AND USE:

LAZUROL GOLD S1037 wood stain is intended for long-term protective colored transparent coatings of soft and hardwood exposed to weather conditions, as well as for interior coatings, e.g. garden furniture, wooden shields, ceilings, wall paneling, fences, cottages, and wooden houses. It creates an effective (decorative) protective coating film on the wood surface, emphasizing the wood grain while also strengthening the wood and providing long-term protection against moisture and UV radiation.

Key properties:

• long-lasting durability
• does not run during application
• exclusive appearance

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, and free from resin residues before application. Wood with high resin content (larch, pine) must be free of all resin exudates in advance, for example by washing with BALTECH C6000 thinner. The quality of the wood pre-treatment affects the overall appearance of the final wood finish and the overall durability of the coating system.
The surface of the wood must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate and higher wood protection (if using a fungicidal primer, also protection against mold, fungi, and insects). Subsequently, the wood surface should be sanded with fine sandpaper before applying the opaque wood stain.
For interior coatings, it is advisable to use colorless LAZUROL CLASSIC S1023 as a primer, and for exterior coatings, it is suitable to use LAZUROL IMPREGNATING BASE S1033 as a primer.
For renovation coatings, it is essential to remove old non-adhering coatings and ensure good substrate adhesion (when completely removing an old coating, the new coating is applied gradually, including wood priming).

DILUTION: thinner BALTECH S6006 (especially for cleaning tools)

Theoretical yield: 17 m2/1 liter for one coat depending on the absorbency of the substrate

APPLICATION PROCEDURE:

Before use, mix thoroughly. LAZUROL GOLD is not diluted, applied with a brush or roller on a pre-prepared, primed, and lightly sanded wooden substrate in 2 to 3 coats, the second coat can be applied after 6 hours. Any sanding of the previous coat can be done after 24 hours. The coating is applied in the direction of the wood grain. Color shades are mutually mixable. The type, surface, and previous coating of the wood affect the final shade of the coating, so it is recommended to carry out a test coat before final application. Claims for color shades will only be accepted if a test coat was carried out before implementation and reported to us.
For uniform areas, always use material from the same production batch. Using the same production batch ensures the same color shade. Different batches' shades should be mixed in a larger container before application. The shade of the stain also depends on the number and thickness of coats (the color sample is prepared on sanded spruce wood on which 3 coats were applied with a brush according to the recommended procedure).
This product is not suitable for painting floors and wood in permanently damp environments (e.g. saunas), wood treated with oils or waxes, or products containing waxes.
If this product is used on wood with a high tannin content (black locust, oak, larch), a test coat should first be carried out. Due to the high tannin content, slow drying, subsequent leaching of tannins, and overall impact on the appearance of the coating film may occur.

Toning:
Other color shades are prepared by toning in the TELURMIX tinting system.

You may find covering materials such as paper masking tape or protective film useful. Don't forget brushes and rollers.

Product Safety Information (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.

Instructions for Safe Handling (P-statements)

• P102: Keep out of reach of children.
• P270: Do not eat, drink, or smoke when using this product.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of water and soap
• P403: Store in a well-ventilated place.
• P501: Dispose of contents/container in accordance with product instructions.