Eternal mat Revital color for restoring old coatings, RAL 5015 blue, 350 g

ETERNAL mat Revital is a universal silk-matt water-based coating material for indoor and outdoor use made from a special cross-linkable dispersion of acrylic copolymers, pigments, fillers, and additives. It forms relatively hard, elastic matte coatings with high weather resistance and excellent blocking resistance, even at higher temperatures. It features very good opacity, good flow, rapid drying, and excellent adhesion even to old synthetic and oil-based coatings. ETERNAL mat Revital meets the requirements of ČSN EN 71 part 3 Safety of toys Migration of certain elements.

Field of application:
ETERNAL mat Revital is intended for indoor and outdoor coatings of wood, fiberboards, particle boards, cement-bonded boards, drywall, non-walkable concrete, metal substrates coated with anti-corrosion paint, and certain types of plastics (tough PVC, hard PVC, ABS, polystyrene plastics, Umakart, polyester, and epoxy laminates; not intended for PE, PP, PTFE coatings). A test coat must be applied on plastics of unknown composition. It is suitable for painting window frames and sashes, including plastic windows, doors, door frames, bodies of central heating units, school boards, furniture, such as wooden, metal, and plastic chairs, shelves, benches, doormats for carpets, playground equipment, etc. ETERNAL mat Revital is suitable for both new and renovation coatings.

Application:
ETERNAL mat Revital is applied to a dry, perfectly cleaned, and degreased substrate free of loose particles and residues of non-adherent coatings with a brush, roller, pneumatic or high-pressure airless spraying, at substrate and ambient temperatures between 8 °C and 30 °C and a relative humidity of max. 75%. Depending on the chosen application technology, the coating material is diluted with water up to a maximum of 15% by weight. For application by high-pressure airless spraying, ETERNAL mat Revital is not diluted. It is sprayed at a pressure of 160 bar with nozzle no. 311 or larger (verified on VYZA vario equipment). ETERNAL mat Revital is applied in two to three layers depending on the desired thickness, with a time interval of at least 2 hours (20 °C). At lower temperatures and higher relative humidity, the time interval must be extended. Extensions are also necessary for highly absorbent substrates.

Consumption (final coat):

• wood, fiberboards 0.22 – 0.35 kg/m²
• metals 0.20 – 0.25 kg/m²
• concrete, plaster 0.30 – 0.35 kg/m²

Coating of steel substrates:
Steel substrates must be thoroughly cleaned of corrosion residues, mechanical impurities, remnants of old coatings, and degreased (preferably with a solution of ETERNAL degreaser concentrate or another suitable detergent followed by rinsing with water). The prepared and dried substrate is coated with one to two layers of ETERNAL anti-corrosive acrylic paint or ETERNAL for metals with an interval of 4 hours between coats. After the anti-corrosive coating dries, two layers of ETERNAL mat Revital paint are applied with a time interval of 2 hours between the layers.

Wood, fiberboard, and particle board coatings:
The substrate must be thoroughly cleaned of dust and mechanical impurities, resinous spots must be removed (e.g., by washing with nitro thinner), and the surface must be primed with FORTEKRYL primer with protective effects against wood-destroying and wood-coloring fungi and wood-destroying insects. In dry interiors, a penetrating agent FORTE penetral can also be used. After the primer dries, the surface is sanded with fine sandpaper. Fiberboards and particle boards are then coated with one layer of ETERNAL In stop isolation paint to prevent the penetration of color stains from the substrate into the top coat. After the isolation paint dries, the surface is sanded with fine sandpaper. Two layers of ETERNAL mat Revital paint are applied to the prepared substrate with a time interval of 2 hours between the layers.

Coatings of concrete surfaces and plasters:
Mineral substrates must be stripped of non-adherent coatings, mechanical impurities, and the greasy surface must be thoroughly degreased (ETERNAL degreaser). The dry substrate is primed with FORTE penetral, and after it dries, two layers of ETERNAL mat Revital paint are applied with a time interval of 3 hours between the layers. For very absorbent substrates (plasters), ETERNAL mat Revital diluted with water in a ratio of 1:1 can also be used. Mineral substrates must be sufficiently carbonated.

Coatings of cement-bonded particle boards:
Cement-bonded particle boards must be sufficiently carbonated. The surface of the boards must be perfectly cleaned of mechanical impurities, non-adherent old coatings, degraded surface layers, and grease. The prepared substrate must be thoroughly saturated with the special penetrating agent FORTE penetral. Penetration is preferably performed with one coat until the substrate is saturated. When the dried penetrating agent begins to form a shiny film on the surface, the penetration is completed. After a minimum of six hours from penetration, two layers of ETERNAL mat Revital paint are applied with a technological break of 4 hours between the layers.

Plastic coatings:
The surface of plastics must be perfectly cleaned, free of any residues of old non-adherent surface treatments, adhesives, separators, protective foils, and degreased (preferably with a solution of ETERNAL degreaser concentrate or another suitable detergent followed by rinsing with water). Glossy surfaces are best sanded with fine sandpaper (No. 360 or finer). Two layers of ETERNAL mat Revital paint are applied to the prepared substrate with a technological break of 4 hours between the layers