Luxol Original Thin Film Wood Stain, 0080 Mahogany, 3.5 l

The Luxol Original thin-film wood stain is used for decorative coatings and provides protection against weather and UV radiation. The innovative formulation offers improved properties, including higher water resistance, excellent adhesion of the subsequent layer, mechanical resistance, and deep penetration into the substrate. The new creamy consistency makes application easier and simplifies spreading. The stain is characterized by the stability of color shades and a matte satin finish. The wood under the coating can naturally breathe, and the lower VOC content represents a reduced burden on the environment.

The Luxol Original product in the form of a thin-layer stain is suitable for treating all construction elements and wooden structures, such as fences, doors, pergolas, garden furniture, house cladding, shutters, cottages, and other outdoor wooden elements. The stain can be safely used indoors, as it has a minimal odor and dries faster.

Drying time:
touch dry: 3h sandable/second coat: 8-14h fully dry: 24h

Instructions for use:
for outdoor coatings, it is recommended to treat the substrate with a fungicidal primer. Apply Luxol Original to a dry and clean surface. Remove any skin that may have formed. Before use, mix the contents thoroughly. Do not dilute. Apply LUXOL ORIGINAL with a brush in the direction of the wood grain. Perform the coating in stable and dry weather. For interiors, apply 1-2 layers. To create long-term protection outdoors, apply 2-3 layers. The interval between applications of individual layers is 8-14 hours. Touch dry after about 3 hours, fully dry after 24 hours. Before applying the next layer, lightly sand the coat. Apply LUXOL ORIGINAL at temperatures of 5-30 °C and relative humidity lower than 85%. Low temperatures and high humidity can significantly affect drying. Clean tools with technical gasoline or thinner S6006. Before cleaning, remove as much paint from the brush as possible.

WARNING:
claims for color shades will only be recognized if a test coat was applied before execution and this was claimed with us. The same color shade is guaranteed when using the same production batch. We recommend mixing color shades of different batches in a larger container before application. The transparent shade is not suitable for outdoor use. The type, surface, and previous coating of the wood affect the final shade of the coating, so we recommend performing a test coat before the final application. Unused product or empty container with residues should be disposed of at hazardous waste collection points or handed over to authorized persons for handling hazardous waste. Do not use empty containers for storing food.

Product Safety Warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.

Safe Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P262: Avoid contact with eyes, skin, or clothing.
• P312: If you feel unwell, call the POISON INFORMATION CENTER/doctor.
• P501: Dispose of contents/container in accordance with product instructions.