Supermal Lime Coating 15 kg

The traditional mineral lime coating represents a proven surface treatment designed for absorbent materials in both indoor and outdoor environments. It is primarily used in basements, garages, farm buildings, technical and agricultural facilities, or on historical buildings. Thanks to its high vapor permeability, it aids the natural regulation of moisture in masonry and prevents water condensation.

Properties:

• Traditional formulation based on slaked lime
• High vapor permeability – facilitates the drying of damp masonry
• Mineral base – does not contain synthetic binders
• Matte, slightly textured surface

Usage:
Designed for application on lime, lime-cement, and clay plasters, natural stone, older mineral coatings, or unglazed bricks. Not suitable for plaster substrates or coatings based on synthetic resins.

Substrate preparation:
The substrate must be clean, cohesive, free from dust, grease, and loose parts. Thoroughly remove old coatings and efflorescence. If necessary, moisten the absorbent substrate with water to improve adhesion.

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H318: Causes serious eye damage.
• H335: May cause respiratory irritation.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P330+P331: IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a TOXICOLOGY CENTER/doctor
• P501: Dispose of contents/container according to product instructions.