Lime for whitening, slaked lime paint, Čerťák, 10 kg

Slaked white lime, intended for construction, gardening, and also for traditional disinfection of farm buildings and facilities. It is ready for direct use and does not need to be slaked or soaked beforehand. The shade is unnormalized white.

Use of Čerťák slaked lime for whitening:

• Production of mortars, plasters, and stuccos directly on site.
• Disinfection of all mineral substrates (plasters, stone, concrete, etc.).

Instructions for use:

Lime for whitening slaked ČERŤÁK is a classic lime coating recommended for basements, storage rooms, utility and agricultural spaces. The substrate material includes plaster, masonry, concrete. Preparation of substrate: The substrate must be dry, cohesive, clean, unsalted, free from grease stains, mold, and dust. The coating should be applied only after the complete curing of new plasters.

Preparation of the coating:

The paint is ready for immediate application. Settled water on the surface does not decrease the quality of the product; before use, the product must be thoroughly mixed, e.g., with an electric mixer. The density of lime for whitening is set for direct application. If necessary, lime can be diluted with water by a maximum of 5%.

Application of the coating:

The coating is applied with a brush, roller, or paintbrush. When using a roller, do not return to the same spot multiple times, as this may strip the previous layer of paint. It is recommended to apply in one to three layers (the second and third coats are applied only after the previous layer has dried). At a temperature of +20°C and relative humidity of 65%, the coating can be overcoated after 2-4 hours. The minimum air and substrate temperature for application is +5 °C to 30 °C. Unpainted surfaces should be protected against splashes by covering. In case of contamination, immediately clean the area with water. Mix thoroughly before application. During application, slight settling may occur; it is advisable to mix the coating occasionally to maintain a homogeneous consistency. We recommend applying the coating in thin layers.

Diluent:
Water

Coverage:
1 liter per 4 m² – in one layer.

Composition and characteristics of the product:
A mixture of calcium hydroxide, magnesium oxide MgO.

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H318: Causes serious eye damage.
• H335: May cause respiratory irritation.

Precautions for safe handling (P-statements)

• P102: Keep out of reach of children.
• P261: Avoid breathing dust/smoke/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call POISON CENTER/doctor
• P501: Dispose of contents/container in accordance with product instructions.