REMAL Facade Acrylic Exterior Paint White 15 kg

Facade paint REMAL FASÁDA is a modern acrylic facade paint that is washable, breathable, excellently covering, and resistant to weather conditions. It is used for painting lime-cement plasters, masonry, concrete panels, panels made of lightweight materials, brizolite, particle board, etc.

Properties of facade paint:

• ideal facade paint
• weather-resistant
• water-repellent and vapor-permeable
• high covering ability
• easily processed facade paint
• washable

Technical properties of facade paint:

• coverage up to 5 m²/1 kg in one layer
• can be tinted with REMAL tinting paint, BARLET tinting paint, or REMAKOL EX-S tinting pastes
• for outdoor plasters, concrete, and other substrates

Example of painting procedure for facade paint:

General conditions that must be followed before applying facade paint:

• repairs with plaster in outdoor environments are not suitable
• old non-adhering coatings must be removed, e.g., with a scraper or high-pressure water
• older substrates must be evaluated, unsatisfactory ones removed, and repaired with new lime-cement plaster
• new lime-cement plasters must be allowed to cure for at least one month
• the coat of facade paint is thin-layered - it follows the substrate, therefore we recommend to brush or rub off grains of sand from the surface after the new plasters dry, to prevent the formation of shadows on the unevenly smoothed paint
• the temperature of the substrate and the environment during work is recommended to be between 15°C and 25°C, paintings cannot be done in the rain, strong wind, and under strong sunlight
• windows, metal parts, and gutters must be covered, dried paint residues are difficult to remove
• substrates must be dry and cured before starting painting, it is recommended to check the moisture of the plaster with a suitable moisture meter before starting the paintings
• for painting larger areas, it is recommended to use products from the same batch, or mix different batches together, especially concerning color shades
• combination of different application techniques (roller + brush) should be tested in advance, especially for saturated shades - danger of different coloration due to the different surface of the paint

Too absorbent, crumbling, or non-adhering substrates must be pre-treated with a suitable primer, e.g., REMAL, BARLET, or SOICRAT. In the case of local repairs, when it is not possible to wait 4 weeks for the plaster to cure, after the new plaster dries, it can be treated with REMAL TELSAL neutralizing salt and after drying continue with the aforementioned primer.

Dilute the paint in the ratio of max. 0.05 l of water to 1 kg of paint. Then mix thoroughly. Apply in 2 layers, apply the next layer after the previous one has dried, at least after 4 hours. For cohesive surfaces, use the product from one batch, mix different batches together before use.

You may find covering material, such as paper adhesive tape or covering foil. Don't forget about brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.