REMAL Deep Penetration V1308M, 5 kg

REMAL deep penetration is a pigmented deep penetration coating for absorbent substrates. As a result of the very small particle size, it penetrates deeply into the treated surface. The pigmentation of the penetration helps to monitor the application area with a light blue tint, ensuring no areas are left uncoated.

REMAL deep penetration properties:

• unification of substrate absorbency before painting with interior and facade paints
• strengthening the substrate before leveling floors with self-leveling compounds
• local repairs of substrate concrete and masonry
• preparation of the substrate before gluing tiles and pavings
• high yield
• deep penetration for absorbent substrates

Technical properties of REMAL penetration:

• yield depending on substrate absorbency and dilution 5 to 30 m²/kg
• dilution depending on substrate absorbency
• applied with a brush or roller in one or two layers (depending on substrate absorbency)
• drying of the penetration layer 2 to 4 hours
• substrate plasters, smoothing compounds, concrete, self-leveling compounds, and other absorbent substrates
• environment interior and exterior
• category A/h
• maximum threshold limit for volatile substances in g/l from January 1, 2010: 30
• maximum content of volatile substances in ready-to-use state in g/l: 7

Dilution of REMAL deep penetration:

• for highly absorbent substrates, deep penetration is used undiluted
• for absorbent substrates, deep penetration is diluted up to 1:3 (1 part penetration : 3 parts water)
• for non-absorbent and low-absorbent substrates diluted up to 1:5 (1 part penetration : 5 parts water)

Example of deep penetration coating procedure:

The substrate must be dry, free of dust and dirt. Before use, the product should be thoroughly mixed. It is applied with a brush or roller in one or two layers (depending on substrate absorbency). The topcoat of paint can be applied after the penetration layer has dried (2 to 4 hours). The optimal temperature for painting is 15 to 25 °C.

Handling of deep penetration:

When working, observe basic hygiene rules. The product is not intended for coatings that come into direct contact with food, feed, drinking water, or for coatings of children's toys and children's furniture. The product is
treated with a biocide. It contains 1,3,5-tris (2-hydroxyethyl) hexahydro-1,3,5-triazin. It may cause an allergic reaction. Keep out of reach of children. If you feel unwell, seek medical advice.

Storage life of deep penetration:

The product retains its useful properties for 5 years from the date of manufacture, in its original unopened packaging. Store in a dry place at a temperature of 5 to 25 °C.

Disposal of packaging and waste of deep penetration:

Dispose of packaging with remnants of the product at a location designated by the municipality for collecting other waste. Further see section 13 of the safety data sheet of the product.

You might find it useful to have covering material, such as paper adhesive tape or covering foil, or brushes, rollers, paintbrushes, and spatulas.