REMAL deep penetration anti-mold V1311, 1 kg

Deep penetration anti-mold REMAL V1311 is used for deep strengthening of the substrate, unifying its absorbency and increasing the adhesion of the surface before painting interior plasters or facades, gluing tiles and pavements, leveling floors with self-leveling compounds, local repairs of underlying concretes, etc.

It prevents mold formation thanks to active fungicidal ingredients. Due to the extremely small particles, it penetrates deeply. The tinted penetration helps to control the coverage area by providing a slight discoloration, so that the substrate remains penetrated. Content of active ingredients: 3-iodo-2-propynyl-N-butylcarbamate (ES 259-627-5) 1.2 g/kg of the product.

Warning:
Use biocidal products safely. Always read the label and product information before use.

Mold penetration and its properties:

• anti-mold penetration on masonry, drywall, concrete and wood
• mold penetration prevents the formation of mold
• enhances the effectiveness of anti-mold coatings, works long-term
• deep penetration strengthens the substrate
• unifies absorption and increases surface adhesion
• fungicidal and biocidal preparation, use safely
• effectively tinted
• well paintable
• deeply strengthens the substrate
• limits crack formation on walls
• mold penetration
• packaging 1 kg

Technical properties of mold penetration:

• yield 5 - 10 m²/1 kg for one coat
• substrate plasters, screeds, concrete, self-leveling compounds and other substrates
• environment interior, exterior
• application penetration with a brush or roller
• yellow-tinted liquid

Dilution of anti-mold penetration:

• for highly absorbent substrates the anti-mold penetration is used undiluted
• for absorbent substrates the penetration is diluted up to 1:0.5 (1 part penetration : 0.5 parts water)
• for non-absorbent and slightly absorbent substrates diluted up to 1:1 (1 part penetration : 1 part water)
• yield depending on the absorbency of the substrate and dilution is 5 to 10 m²/kg

Example of the application procedure for mold penetration:

The substrate must be dry, free of dust and dirt. Areas infected with mold should be treated with the remedial agent REMAL Sanal for masonry according to the instructions. Before use, the product needs to be properly mixed. Apply with a brush or roller in one or two coats, depending on the absorbency of the substrate. The top coat of paint should be applied after the penetration layer has dried, within 2 to 4 hours. The optimal temperature for painting is 15 to 25° C.

Handling of mold penetration:

When working, observe basic hygiene rules. The product is not intended for coatings in direct contact with food, feed, drinking water, or for coatings of children's toys and furniture. The product is treated with a biocide. It contains 3-iodo-2-propynyl-N-butylcarbamate, hexahydro-1,3,5-triazine-1,3,5-triethanol. It may cause an allergic reaction. Keep out of reach of children. If you feel unwell, seek medical assistance.

Storage of anti-mold penetration:

The product retains its useful properties for 5 years from the date of manufacture, in the original unopened packaging. Store in a dry place at a temperature of 5 to 25 °C.

Disposal of containers and waste from anti-mold penetration:

Containers with leftover product should be disposed of in a place designated by the municipality for the collection of other waste. See section 13 of the product safety data sheet for more information.

Safety warning of the product (H-phrases)

• EUH208: Contains (see hazardous substances). May cause allergic reactions.