REMAL Wall Finishing Compound, 15 kg

REMAL Finishing Compound is a leveling and decorative finishing compound for interior use with excellent sandability. It is used for leveling small imperfections on walls (plaster, masonry, drywall, etc.) throughout interiors. It is very easy to apply and not suitable for grouting tiles.

Features of the REMAL decorative wall finishing compound:

• the compound is ready to use, it is not recommended to mix intensively or dilute with water
• decorative wall finishing compound
• leveling internal plaster
• plaster for walls and ceilings
• easy application
• excellent sandability

Coverage of the internal decorative wall finishing compound:

At a thickness of 1 mm, it is approximately 1.7 to 1.9 kg/m², depending on the irregularity of the substrate and the thickness of the applied layer.

Example of applying the decorative wall finishing compound:

Remove old and non-adhering coatings from renovated surfaces. Treat absorbent substrates with REMAL UNIVERSAL PRIMER, and treat non-cohesive and crumbling substrates with REMAL DEEP PRIMER. This will remove dust, strengthen the surface, unify absorbency, and ensure adhesion of the coating.

Drying time is 4 hours. The compound is ready for immediate use. It is applied with a stainless steel trowel in 1 or 2 layers, with a thickness of one, 1.5 to 2 mm. After complete drying (24 hours), sand with a grid or sandpaper.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.