Devoskyt roughness 2, interior filler, 21 kg

Devoskyt interior filler is designed for surface finishing of walls and ceilings in interiors. It is ready for immediate use. Devoskyt is an excellent base for painting, wallpapering, and all decorative techniques. In combination with Mikrosem 3A (similar to a reinforcement mesh), you will reduce the consumption of Devoskyt and significantly limit possible micro-cracks. This creates a so-called "scratchable surface." This system is successfully used abroad as well as on drywall.

• Ready for immediate use
• Easy processability
• Perfectly smooth surface
• After drying of the applied layer, another layer can be applied
• Lower dust accumulation
• Uniform absorption of the base
• Cost savings in coatings and adhesives during subsequent surface treatments
• Higher color stability of coatings
• Not self-sanding
• Easy repairability

Suitable substrates:
concrete, aerated concrete, ytong, core plaster, stucco plaster, old plasters, drywall, OSB boards,...

Suitable surface finishes:
all painting techniques, sprayed wallpapers, paper wallpapers, fiberglass wallpapers, decorative techniques, spraying materials, artificial marbles, textile and vinyl wallpapers

Consumption:
1 – 2.5 kg/m²

Dilution:
ready for immediate use

Filler:
finely ground limestone

Application:
Devoskyt no.1 is applied from 0.5 - 1 mm, Devoskyt no. 2 from 0.5 - 4 mm, Devoskyt no. 7 from 0.5 - 4 mm. For good substrate leveling, it is recommended to apply multiple thinner layers rather than one thick layer. After full drying, which depends on the layer thickness, temperature, relative humidity, and absorption of the substrate, surface irregularities created during filling can be smoothed out with a damp sponge or the surface can be sanded with sandpaper no. 80 - 120. Due to the uniform absorbency and perfect smoothness of Devoskyt, the consumption of final materials will be reduced. The warranty period is 24 months in unopened original packaging.