REMAL Color paint for walls 650 Banana, 5 + 1 kg

REMAL Color is a water-based tinted paint with a pleasant fragrance in attractive shades. It is recommended for painting walls and ceilings indoors, including plasters, drywall, and other substrates. It is easy to process, non-toxic, and environmentally friendly.

Wall paint that is easy to wash, exhibits resistance to wet abrasion after 28 days - class 5. (measured according to ČSN EN ISO 11998, classified according to EN 13300).

Shade banana 650: in character, it is a warm yellow sunlight color. Combined with white, it creates the impression of a fresh, bright summer morning. You will be satisfied with it in the kitchen, it will brighten up even a spacious hallway. It goes well with brass and white accessories. It is elegant when combined with champagne color.

Key features of Remal Color paint:

• shade 650 banana
• living spaces
• excellent coverage
• matte appearance
• highly abrasion resistant
• color fastness
• suitable for walls, ceilings, plaster, concrete, or drywall in interiors
• highly breathable wall paint
• vapor-permeable wall paint
• easy to work with
• water-based natural paint
• suitable for children's rooms
• non-toxic
• easy to wash wall paint
• wet abrasion resistance class 5
• packaging of the paint in sizes of 5+1 kg, a total of 6 kg, will be sufficient for up to 60 m² in one layer

Technical properties of REMAL Color paint:

• yield up to 10 m²/kg in one layer
• application method brush, roller, spraying
• water-based wall paint
• for application on interior plaster, drywall, and other substrates
• viscosity 2000 - 4000 mPas (Brookfield HB DV 2+ 4/100)
• content of non-volatile substances min. 48%
• pH 8.5 – 9.7
• produced in shades according to a special color chart

Example of painting procedure for REMAL Color wall paint:

Before painting, remove layers of old and non-adhering coatings. Treat absorbent substrates with REMAL universal primer, non-cohesive and crumbling substrates with REMAL deep primer. This will remove dust from the surface, strengthen it, unify absorbency, and ensure paint adhesion. Drying time is 4 hours. Level out imperfections on the wall with REMAL Filler.

The coating can be diluted according to the method of application by a maximum of 10% water. Then mix thoroughly. Apply with a brush, roller, or by spraying in 2 layers, applying the next layer after the previous one has dried, no less than 4 hours later. The optimal temperature for painting is 15 to 25° C. The temperature of the substrate and the environment must not drop below 5° C during application. For cohesive areas, use product from one batch, mix different batches together before use.

Handling the wall paint:

When working, follow basic hygiene rules. The product is not intended for coatings that come into direct contact with food, animal feed, drinking water, or for coatings on children's toys and furniture.

Keep out of reach of children. If you feel unwell, seek medical assistance.

The product is treated with a biocide. Contains 1,3,5-tris(2-hydroxyethyl)hexahydro-1,3,5-triazin, 1,2-benzoisothiazol-3(2H) -on+, octhilinone (ISO), reaction mixture: 5-chloro-2-methylisothiazol-3(2H)-on [CE number 247-500-7] and 2-methylisothiazol-3(2H)-on [CE number 220-239-6] (3:1). May cause allergic reaction.

You may find useful

covering materials, such as paper masking tape or covering film, or sandpapers. Don't forget brushes, rollers, and scrapers.

Washability of the paint in practice is addressed by the standard WET ABRASION RESISTANCE ČSN EN ISO 11998

This international standard ISO EN 11998 describes the accelerated method for determining resistance to wet abrasion and establishing the washability of the paint. Regarding the cleanliness of coatings, it only specifies the testing method itself but does not specify contaminating substances. After drying and conditioning, the painted sample is weighed and subjected to wet cleaning cycles in a testing abrasion (cleaning) device. From the weight loss, the average value of the thickness reduction of the coating is calculated. For determining cleanability, contaminating substances are applied to identically prepared samples. Specified contaminating substances are allowed to remain in contact with the paint film for the prescribed time. Painted, contaminated samples are then subjected to cleaning cycles. It is evaluated whether the contaminating substance has been removed and whether the coating is resistant to wet abrasion.

5 classes are used for evaluation - class 1 is the best – class 5 is the worst. Grading is like in school.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May cause allergic reaction.