REMAL Vinyl Color mat washable paint for walls, 430 azure blue, 3.2 kg

Washable paint for walls REMAL Vinyl Color Mat is a premium colored washable painter's coating with a velvety matte finish, excellent coverage, and abrasion resistance. The surface of the paint is gently washable. The coating is intended for painting walls and ceilings indoors on plaster, drywall, and other substrates.

The product is easy to process, safe for health, and environmentally friendly. It shows washability of paint and resistance to abrasion when wet after 28 days - class 1. (measured according to ČSN EN ISO 11998, classified according to EN 13300). Application method: brush, paint roller.

Properties of washable paint for walls REMAL:

• washable paint for walls
• velvety matte
• washable paint class 1. ČSN EN ISO 11998, classified according to EN 13300
• extremely covering
• wide range of shades
• easy handling
• traditional Czech production
• environmentally friendly washable paint
• safe for health
• suitable for children's rooms

Approximate coverage of washable paint:

up to 12 m² /1 kg for one coat.

Technical properties of washable paint for walls:

• substrate: plaster, drywall, and other substrates
• environment: interior
• dilution: water
• washability of paint class 1 - fully washable paint for walls

Application procedure for washable paint:

Old non-adhering coatings in thicker layers must be scraped off. Before painting, treat the surface with REMAL deep penetration primer. This will remove dust, strengthen the surface, unify absorbency, and ensure adhesion. Drying time is 4 hours. Level out unevenness on the wall with REMAL filler. For touch-ups, for example, after water leaks, it is advisable to use the isolating coating REMAL Flek-stop. Before use, thoroughly mix the coating, it is diluted for painting. If necessary, dilute with a maximum of 5% clean water. Apply with REMAL Vinyl roller with short nap. The coating covers in one layer. Recoat at least after 4 hours. The optimal application temperature is 15 to 25 °C. Clean contaminated areas and tools immediately after application with water, as dried coatings are difficult to remove.

Method of application for washable paint on walls:

REMAL Vinyl roller with short nap, brush, spraying AIRLESS - e.g. STORCH AIRLESS ST 550, STORCH AIRLESS ST 700 or STORCH AIRLESS ST 800 recommended pressure from 120 – 150 bar, nozzle size 515 or 517, gun filter 50 mesh. When applying by spraying, it is always recommended to conduct tests on the specific equipment in advance.

Handling washable paint REMAL:

When working, follow basic hygiene rules. The product is not intended for coatings that come into direct contact with food, feed, drinking water, or for painting children's toys and furniture. Keep out of reach of children. If you feel unwell, seek medical assistance. The product is treated with a biocide. Contains a reactive mixture: 5-chloro-2-methylisothiazol-3(2H)-one [EC number 247-500-7] and 2-methylisothiazol-3(2H)-one [EC number 220-239-6] (3:1). May cause an allergic reaction.

Items that may be useful for you

covering materials, such as paper adhesive tape or covering foil, possibly sanding papers. Don't forget brushes, rollers, paint trays, and spatulas.

Washability of paint in practice addresses the standard ABRASION RESISTANCE WHEN WET ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining resistance to wet abrasion and establishing the washability of paint. Regarding the cleanability of coatings, it only specifies the testing method itself but does not specify the contaminating substances. After drying and conditioning, the coated sample is weighed and subjected to wet cleaning cycles in a testing abrasion (cleaning) device. The loss of weight is used to calculate the average value of the loss of coating thickness. To determine cleanability, contaminants are applied to identically prepared samples. Specified contaminants are left in contact with the coating for the prescribed time. The coated, contaminated samples are then subjected to cleaning cycles. It is evaluated whether the contaminant has been removed and the coating is resistant to wet abrasion.

For evaluation, 5 classes are used - class 1 is the best – class 5 is the worst.