REMAL Vinyl Color Matt washable wall paint, 820 coral red, 250 g

Washable wall paint REMAL Vinyl Color Matt is a premium colored washable paint with a velvety matte finish, excellent coverage, and abrasion resistance. The paint surface is gently washable. The coating is intended for painting walls and ceilings indoors on plaster, drywall, and other substrates.

The product is easy to process, health-friendly, and environmentally friendly. It exhibits washability and abrasion resistance for wet wear after 28 days - class 1. (measured according to ČSN EN ISO 11998, classified according to EN 13300). The application method is brush, paint roller.

Properties of washable wall paint REMAL:

• washable wall paint
• velvety matte
• washable paint class 1. ČSN EN ISO 11998, classified according to EN 13300
• extremely covering
• a wide range of shades
• easy handling
• traditional Czech production
• environmentally friendly washable paint
• health-friendly
• suitable for children's rooms

Estimated coverage of washable paint:

up to 12 m² /1 kg for one coat.

Technical properties of washable wall paint:

• substrate plaster, drywall, and other substrates
• environment interior
• dilution water
• washability paint class 1 - fully washable wall paint

Procedure for applying washable paint:

Old non-adhering coatings in thicker layers must be scraped off. Before painting, treat the surface with REMAL deep penetration primer. This will remove dust, strengthen, unify absorbency, and ensure adhesion. Drying time is 4 hours. Level out wall irregularities with REMAL filler. For covering spots, e.g., after leaks, it is suitable to use REMAL Flek-stop isolating coat. Before use, mix the coating thoroughly; it is diluted for painting. If necessary, dilute with a maximum of 5% clean water. Apply with a REMAL Vinyl roller with short hairs. The coating covers in one layer. Touch up at least after 4 hours. The optimal application temperature is 15 to 25 °C. Clean contaminated areas and tools immediately after application with water; dried paint is difficult to remove.

Method of application of washable wall paint:

REMAL Vinyl roller with short hairs, brush, airless spraying - e.g., STORCH AIRLESS ST 550, STORCH AIRLESS ST 700 or STORCH AIRLESS ST 800 with recommended pressure from 120 – 150 bar, nozzle size 515 or 517, gun filter 50 mesh. When applying by spraying, we recommend always performing tests on specific equipment in advance.

Handling washable paint REMAL:

Follow basic hygiene rules while working. The product is not intended for coatings that come into direct contact with food, feed, drinking water, or for coatings on children's toys and furniture. Keep out of reach of children. If you feel unwell, seek medical help. The product is treated with a biocide. Contains a reactive mixture: 5-chloro-2-methylisothiazol-3(2H)-one [ES number 247-500-7] and 2-methylisothiazol-3(2H)-one [ES number 220-239-6] (3:1). May cause allergic reactions.

You might find it useful

covering material, such as paper adhesive tape or covering film, or sanding paper. Don't forget brushes, rollers, spatulas, and scrapers.

Washability of the paint in practice is addressed by the standard ABRASION RESISTANCE OF WET WEAR ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining wet abrasion resistance and washability of paint. Regarding the cleanability of coatings, it only defines the testing method itself but does not specify the contaminating substances. After drying and conditioning, the painted sample is weighed and subjected to wet cleaning cycles in a testing abrasion (cleaning) device. The loss in weight is used to calculate the average loss of coating thickness. For determining cleanability, contaminating substances are applied to similarly prepared samples. Specified contaminating substances are left in contact with the coating film for the prescribed time. The painted, contaminated samples are then subjected to cleaning cycles. It is evaluated whether the contaminating substance was removed and whether the coating is resistant to wet abrasion.

For evaluation, 5 classes are used - class 1 is the best – class 5 is the worst.