REMAL základ 2v1 painter's penetrating paint, 15 kg

It is an interior water-based white paint combining the parameters of a primer and an undercoat. It significantly reduces the consumption of the final coat, unifies the absorbency of the substrate, and increases its strength.

It is suitable as a base for coatings applied with REMAL paints. It is particularly recommended for drywall sheets, but can also be used on other solid mineral substrates. It has excellent coverage and high whiteness. It can also serve for easier covering of deep shades.

Properties of the penetrating paint:

• easy to work with
• health-friendly
• environmentally friendly
• up to 11 m²/kg in one layer
• variant 15 kg

Application area of the penetrating paint:

• substrates such as drywall, plasters, and other bases
• interior environment
• produced in a non-standardized white shade
• tinting is possible with common tinting pastes, e.g. REMAL LIQUID TINTING PAINT or REMAKOL
• application by brush, roller, or spraying

Example of the painting procedure:

The substrate must be cohesive, free of dust and dirt. We recommend treating overly absorbent and loose substrates with a suitable acrylic primer – e.g. REMAL DEEP PENETRATION. This will remove dust from the surface, unify absorbency, and ensure adhesion. Drying time for the primer is approximately 4 hours. Level out imperfections with REMAL PUTTY.

If necessary, dilute the paint with a maximum of 0.1 liters of water per 1 kg of paint. Then mix thoroughly. Apply with a brush, roller, or spray in 1 - 2 layers; apply the next layer only after the previous layer has dried. The optimal temperature for painting is between 15 and 25 °C. The temperature of the substrate and environment must not fall below 5 °C during application. For large areas, use product from the same batch; mix different batches together before use.