REMAL base 2in1 painter's penetrating paint, 5 kg

It is an interior water-based white paint combining the parameters of penetration and a primer paint. It significantly reduces the consumption of the final coat, unifies the absorbency of the substrate and increases its strength.

It is suitable for coatings performed with REMAL paint. It is especially recommended for drywall, and it can also be used on other solid mineral substrates. It has excellent coverage and high whiteness. It can also be used to facilitate the covering of deep shades.

Properties of the penetrating paint:

• easy to work with
• non-toxic
• eco-friendly
• up to 11 m²/kg in one layer
• variant 5 kg

Area of use for the penetrating paint:

• substrate drywall, plasters, and other substrates
• environment interior
• produced in a non-standardized white shade
• tinting is possible with standard tinting pastes, e.g., REMAL LIQUID TINTING PAINT or REMAKOL
• application with brush, roller, spraying

Example of coating procedure:

The substrate must be cohesive, free from dust and dirt. For overly absorbent and non-cohesive substrates, we recommend treating with a suitable acrylic primer – e.g., REMAL DEEP PENETRATING PRIMER. This will remove dust from the surface, unify absorbency, and ensure adhesion. Drying time for the primer is about 4 hours. Even out irregularities with the product REMAL PUTTY.

If necessary, dilute the paint in a ratio of max. 0.1 l of water per 1 kg of paint. Then mix thoroughly. Apply with a brush, roller, or spraying in 1 - 2 layers; apply the next layer only after the previous layer has dried. The optimal temperature for painting is 15 to 25 °C. The temperature of the substrate and environment must not drop below 5 °C during application. For continuous areas, use product from the same batch; mix different batches together before use.