BARLET silicone paste-like plaster grainy 1.5 mm, 25 kg

It is used for final external and internal decorative surface finishes of buildings. Grain size 1.5 mm.

Properties of silicone paste-like plaster:

• Paste-like grainy plaster
• Grain size 1.5 mm
• Increased protection against mold and algae
• Weather resistant
• Color shade stability, decorative appearance

Substrate preparation:

The substrate must be dry, solid, mature, free of dust and old coatings, e.g. plaster or leveling compound of the insulation system. Perform the primer with BARLET BASE COAT FOR DECORATIVE PLASTERS colored to the shade of the plaster.

Recommended working procedure:

Before application, mix the plaster thoroughly but without whipping with a slow-speed mixer. You can adjust the consistency of the plaster with a small amount of clean water. Apply the plaster evenly and continuously with a stainless steel trowel in a layer determined by the grain size. After a short drying period, adjust the surface of the plaster to the desired texture with a plastic trowel. At higher temperatures above 25 °C, the plaster dries faster, consider proper texture creation and joining. At lower temperatures of 5 to 12 °C and high humidity, use plaster marked Z. At temperatures below 5 °C, the plaster cannot be applied. Protect the applied plaster from rain during drying. Cover adjacent areas; dried remnants of plaster are difficult to remove. For larger areas, use the product from one batch, mix different batches together before use!

The product is treated with a biocide.

Consumption:

At a grain size of 1.5 mm, 2.5 - 2.8 kg/m²

Product safety warnings (H-statements)

• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/clothing/eye protection/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.