Uniflex joint filler for drywall sanding, in a tube, 300 g

Uniflex joint filler for drywall is a one-component sanding filler for filling joints between drywall sheets. The filler is suitable only for interior use. The filler is applied with a spatula or stainless steel trowel. A high-quality drywall filler made in the Czech Republic.

Use of Uniflex joint filler for drywall sanding:

The surface must be cleaned and degreased. Loose parts and old coatings must be removed. The filler is in application consistency, simply mix before use. We apply the filler with a spatula into the joints between the drywall sheets, and for the final finish, we use a stainless steel trowel. The filler is applied in a layer thickness of 1-4 mm. After hardening, the surface can be smoothed with a damp sponge or sanded. The filler is suitable for all common interior painting coatings such as REMAL, SUPERMAL, etc.

Thinner:

Water.

Coverage:

For sealing a 1 m long joint with a width of 15 mm and a depth of 10 mm, the consumption is 0.2 - 0.3 kg of filler.

Appearance and consistency:

Butter-like mass without foreign mechanical impurities, suitable for application should not drip from the trowel.

Drying time:

Depending on the ambient temperature and applied layer 30 - 180 minutes.