Uniflex PES-FILLER fine filler for metal, steel, stone, concrete and wood, 2 kg

Two-component universal polyester filler for wood, metal, concrete is intended for filling medium and larger irregularities. Excellent adhesion to most surfaces, especially to metal, steel, stone, concrete, wood, etc. Suitable for repairing damaged substrates. High filling capacity. Easy processability and sanding. Paintable. For indoor and outdoor use. The filler must not be used for filling areas that come into direct contact with food and drinking water.

Properties of the two-component filler:

• shade white
• high filling capacity
• easy processability and sanding
• paintable
• for indoor and outdoor use
• adhesion to most surfaces
• for metal, steel, stone, concrete, wood, etc.
• viscosity at 20°C: paste-like
• VOC - content: 2004/42/IIB (b) (250) < 250g/l

Processing of the two-component filler:

Substrate for the filler:
The substrate must be clean, dry, load-bearing, free from rust, fats and greases. Original coatings should be sanded down to the substrate. Metal substrates should be treated with a primer with anti-corrosive properties – especially important in exterior use.

Curing the filler:
The filler is cured with a hardener in a weight ratio of 100 parts filler : 2 parts hardener. Excessive addition of hardener is undesirable. It may lead to efflorescence and a change in color shade in the subsequent topcoat.

Processing time of the filler:
3 – 4 minutes at + 20 °C. The reaction temperature must not drop below +5 °C.

Application:
by smoothing.

Drying time and sandability:
at +20 °C approximately after 15 minutes against dust, sandable after 25 minutes.

Product safety warnings (H-statements)

• H226: Flammable liquid and vapor.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H335: May cause respiratory irritation.
• H361d: Suspected of damaging the fetus via inhalation.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long lasting effects.
• H413: May cause long lasting harmful effects to aquatic life.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a TOXICOLOGICAL INFORMATION CENTER/doctor.
• P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P308+P311: IF exposed or concerned: Call a TOXICOLOGICAL INFORMATION CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day)
• P405: Store locked up.
• P501: Dispose of contents/container in accordance with product instructions.