Uniflex acrylic filler for drywall, masonry and wood, 800 g

Paste-like acrylic filler intended for minor repairs of masonry, drywall and wood in both indoor and outdoor environments. Uniflex filler or adhesive is used for filling medium and larger irregularities, offers excellent adhesion to most substrates, especially to metal, steel, stone, concrete, wood, etc., is paintable and suitable for both indoor and outdoor use.

Characteristics of Uniflex acrylic filler for drywall:  

• Suitable filler for drywall,
• suitable filler for wood,
• suitable filler for masonry,
• medium and large irregularities,
• excellent adhesion.

Diluent:
Water

Yield:
1 kg / m - at a 1 mm thickness

Drying time:
grade 2 = max. 2 hours, grade 4 = max. 24 hours

Packaging:
300 g tube,  400 g, 800 g, 1.6 kg

Use:
The filler is intended for repairing cracks in masonry, repairing detached corners, sealing joints between drywall sheets, repairing fine cracks in masonry and repairing cracks in chipboard, wood, certis boards, etc. The acrylic filler is applied with a spatula, scraper and for full-surface application with a stainless steel trowel.

Filling:
Filling is done from 0.5 mm up to 3 mm in one layer. After 30 minutes it forms a hard sanding film. A layer of 1-3 mm completely dries within 30 minutes to 2 hours depending on the ambient temperature and the applied layer. It is suitable for both indoor and outdoor use (if used outdoors - it must be coated immediately with paint).

Instructions for use:
The filled areas must be cohesive, free from grease and dust. After preliminary drying, the surface can be smoothed with a damp sponge; after curing, the filler can be sanded with sandpaper 100-120. After drying and sanding, common paints (synthetic, enamels, acrylics, etc.) can be applied to the filled areas. Clean all tools immediately with water after finishing the work. Follow basic hygiene rules while working.