Uniflex PES-TMEL UNI universal adhesive, 2 kg

Uniflex adhesive uni is a two-component universal polyester adhesive designed for filling larger and smaller irregularities. It is mainly used on metal, steel, stone, concrete, and wood. The Uni adhesive is paintable, suitable for both indoor and outdoor use. Metal substrates subject to corrosion should be treated with an anti-corrosive primer, especially in outdoor environments. The adhesive is gray with a red hardener. The adhesive must not be used for filling areas that come into direct contact with food and drinking water.

Characteristics of the universal adhesive:

• Two-component universal polyester adhesive
• Designed for filling medium and larger irregularities
• Excellent adhesion to most surfaces, especially metal, steel, stone, concrete, wood, etc.
• Suitable for repairing damaged substrates
• High filling capacity
• Easy to process and sand
• Paintable
• For indoor and outdoor use
• Viscosity at 20 °C paste-like
• VOC content: 2004/42/IIB (b) (250) < 250g/l
• Gray shade

Processing the universal adhesive:

Substrate for adhesive:
The substrate must be clean, dry, load-bearing, free from rust, fats, and grease. Original coatings must be sanded down to the substrate. Metal substrates should be treated with a primer with anti-corrosive properties - important especially in outdoor environments.

Hardening of the adhesive:
The adhesive is hardened with the hardener in a weight ratio of 100 parts of adhesive : 2 parts of hardener. Excessive addition of hardener is undesirable. It can lead to blooming and changes in color shade in the subsequent topcoat.

Processing time of the adhesive:
3 – 4 minutes at + 20 °C. The reaction temperature must not fall below +5 °C.

Application of the adhesive:
by troweling.

Drying and sanding time of the adhesive:
at + 20°C approximately after 15 minutes against dust, sandable after 25 minutes.

Product safety warnings (H-phrases)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H335: May cause respiratory irritation.
• H361d: Suspected of damaging the unborn child through inhalation.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long lasting effects.

Safe handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/protective goggles/face shield.
• P308+P311: IF exposed or concerned: Call a POISON CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container in accordance with product instructions.