Uniflex drywall compound for sanding, 1.6 kg

Uniflex drywall compound is a one-component filler for filling joints between drywall boards. The compound is suitable only for interior use. The compound is applied with a spatula or stainless steel trowel. High-quality drywall compound made in the Czech Republic.

Instructions for use of Uniflex drywall compound for sanding:

The substrate must be cleaned and degreased. Non-adhering parts and old coatings must be removed. The compound is in application consistency, just mix before use. We apply the compound with a spatula into the joints between drywall boards and for the final finish, we use a stainless steel trowel. The compound is applied in a layer thickness of 1-4 mm. After hardening, the surface can be smoothed with a damp sponge or sanded down. The compound is suitable for all common interior painting coatings, e.g., REMAL, SUPERMAL, etc.

Thinner:

Water.

Yield:

For sealing a 1 m long joint with a width of 15 mm and a depth of 10 mm, the consumption is 0.2 - 0.3 kg of compound.

Appearance and consistency:

Buttery mass without foreign mechanical impurities, suitable for applying, should not run off the trowel.

Drying time:

Depending on the ambient temperature and applied layer, 30 - 180 minutes.