Chamotte jointing compound is intended for building, repairing, and grouting fireplaces and stoves, as well as for bonding lightweight refractory boards, mats, and chamotte elements to metal and ceramic substrates. You can use it for minor repairs as well as when building a new fireplace, provided the correct mixing ratio and a maximum layer thickness of up to 5 mm are respected.
Depending on the extent of the repair or construction, choose the amount of chamotte mortar that you will work with at once. For a whole package, prepare a solution of water and water glass (a total of 1 l) in a 1:1 ratio, i.e., 0.5 l of water glass and 0.5 l of water. Empty the contents of the bag (5 kg) into a container and pour in the prepared solution, mix well, and let it rest for about 3 minutes. Then lightly mix again, and the mortar is ready for use. It is recommended to prepare only the amount that you will process within 2 hours. If work is interrupted, lightly smooth the mass in the container and pour in 1 mm of water. This will prevent drying out, and you can continue working by pouring out the water.
When building new fireplaces, it is crucial to watch the maximum thickness of the mortar layer up to 5 mm. Lightly dampen the chamotte bricks and other elements before building! For grouting and repairing damaged masonry, proceed as follows: Wet the areas to be repaired with water, then fill them with the prepared mortar and smooth the surface. The repaired heating surface should be left to dry for 12–24 hours depending on the size and extent of the repair. Then, the drying should be completed with gentle heating (2–6 hours) until the repaired areas harden completely.
The substrate must be thoroughly cleaned of grease and especially rust, for which we recommend using a rust remover. Before bonding, it is advisable to first coat the substrate with a thinner mix of mortar, let the layer dry, and only then proceed to bonding. The mixture also serves to protect and renovate internal masonry, ovens, and thermally exposed metal parts. The mortar can be applied wherever the temperature does not exceed 1400 °C.
Safety instructions:
When working, use protective gloves, protective clothing, and protective goggles or face shield. Follow basic hygiene rules! After working, wash your hands and any affected skin with water and soap and treat with a suitable repairing cream. In case of eye contact, rinse eyes with running water, and in case of accidental ingestion, rinse mouth, drink 0.5 l of water, and seek medical attention. In more serious cases, always seek medical help.
Technical data:
content Al2O3 38–40 %, SiO2 50–55 %, TiO2 1.8–2.8 %.
Diluent:
water/water glass 1:1
Cleaning tools:
water
Storage:
In a dry environment at temperatures of 5–25 °C in unopened, intact packaging. Use within 24 months from the filling date indicated on the packaging.
| Species: | ostatní |