Uniflex filler for drywall sandable, 800 g

Uniflex filler for drywall sandable single-component filler for filling joints between drywall boards. The filler is suitable only for interior. The filler is applied with a spatula or stainless steel trowel. High-quality drywall filler made in the Czech Republic.

Usage of Uniflex filler for drywall sandable:

The substrate must be cleaned and degreased. Loose parts and old coatings must be removed. The filler is in application consistency, just mix before use. The filler is applied with a spatula into the joints between drywall boards, and for the final finish, we use a stainless steel trowel. The filler is applied in a layer thickness of 1-4 mm. After curing, the surface can be smoothed with a damp sponge or sanded. The filler is suitable for all common interior paint coatings such as REMAL, SUPERMAL, etc.

Thinner:

Water.

Yield:

For sealing a 1 m long joint with a width of 15 mm and depth of 10 mm, the consumption is 0.2 - 0.3 kg of filler.

Appearance and consistency:

Buttery consistency without foreign mechanical impurities, suitable for application, should not drip from the trowel.

Drying time:

Depending on the ambient temperature and the applied layer, 30 - 180 minutes.