Uniflex acrylic putty for drywall, masonry, and wood, 1.6 kg

Acrylic paste-like putty for minor repairs of masonry, drywall, and wood in interior and exterior. Uniflex putty or adhesive intended for filling medium and larger irregularities, excellent adhesion to most surfaces, primarily to metal, steel, stone, concrete, wood, etc., paintable, for indoor and outdoor use.

Characteristics of Uniflex acrylic putty for drywall:

• Suitable putty for drywall,
• suitable putty for wood,
• suitable putty for masonry,
• medium and large irregularities,
• excellent adhesion.

Diluent:
Water

Coverage:
1 kg / m - at 1 mm layer

Drying time:
grade 2 = max. 2 hours., grade 4 = max. 24 hours

Packaging:
300 g tube, 400 g, 800 g, 1.6 kg

Usage:
The putty is intended for repairing cracks in masonry, for fixing fallen corners, sealing joints between drywall boards, repairing fine cracks in masonry, and repairing cracks in particle boards, wood, certis boards, etc. The acrylic putty is applied using a spatula, scraper, and for full-surface application, a stainless steel trowel.

Filling:
Filling is done from 0.5 mm to 3 mm in one layer. After 30 minutes, it creates a hard sanding film. A layer of 1-3 mm completely dries in 30 minutes - 2 hours depending on ambient temperature and the layer applied. It is suitable for indoor and outdoor use (when used outdoors - must be immediately covered with paint).

Instructions for use:
Filled areas must be cohesive, free of grease and dust. After tackiness, the surface can be smoothed with a damp sponge, after curing, the putty can be sanded with sanding paper 100-120. After drying and sanding, common paints (synthetic, enamels, acrylics...) can be applied to the filled areas. All tools must be immediately washed with water after finishing work. Basic hygiene rules should be followed during work.