Uniflex PES-TMEL wood, wood filler, white, 200 g

BARVY A LAKY HOSTIVAŘ Uniflex PES-TMEL wood filler or adhesive designed for filling medium and larger irregularities, excellent adhesion on most surfaces, especially on metal, steel, stone, concrete, wood etc., paintable, for indoor and outdoor use.​ Excellent for wooden windows, doors, frames, etc. High filling capacity. Fine structure with high thixotropy ensures very easy workability, sanding, and a fine surface after sanding. Paintable. For indoor and outdoor use. The filler should not be used for filling areas that come into direct contact with food and drinking water.

Properties of wood filler:

• shade of wood filler white
• filling medium and larger irregularities
• on metal, steel, stone, concrete, wood
• excellent for wooden windows, doors, frames, etc.
• thixotropic
• high filling capacity
• very easy workability
• sanding
• paintable
• for indoor and outdoor use
• viscosity at 20 °C: pasty
• VOC - content: 2004/42/IIB (b) (250) < 250g/l

Processing of wood filler

Usage of wood filler: 
ideal filler for wood with a high content of wood flour for filling wood, does not shrink, well sandable and flexible.

Substrate for wood filler: 
wood, particle board, solid wood, batten boards, and all wood products. The substrate must be clean, dry, load-bearing, free from rust, oils, and greases. Ideally sanded. Original coatings should be sanded back to the substrate. When used outdoors, treat the metal substrate with a universal primer.

Curing of wood filler:
The filler cures with hardener in a weight ratio of 100 parts filler : 2 parts hardener. Excessive addition of hardener is undesirable. It may lead to blooming and color change in subsequent coatings.

Processing time of wood filler:
3 to 4 minutes at +20 °C. The reaction temperature must not drop below +5 °C.

Application of wood filler:
by smoothing.

Drying time and sandability of the filler
at + 20°C after about 15 minutes dust-free, sandable after 25 minutes.

Product safety warnings (H-statements)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H335: May cause respiratory irritation.
• H361d: Suspected of damaging the unborn child via inhalation.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.
• H413: May cause long-lasting harmful effects to aquatic life.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P280: Use protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a TOXICOLOGY INFORMATION CENTER/doctor
• P303+P361+P353: IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water/shower.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P308+P311: IF exposed or concerned: Call a TOXICOLOGY INFORMATION CENTER/doctor/ Tel. 224 919 293 or 224 915 402 (24 hours a day)
• P405: Store locked up.
• P501: Dispose of contents/container according to product instructions.