Uniflex PES-TMEL wood, wood putty, light wood, 200 g

BARVY A LAKY HOSTIVAŘ Uniflex PES-TMEL wood putty or adhesive designed for filling medium and larger imperfections, excellent adhesion on most surfaces, especially on metal, steel, stone, concrete, wood, etc., paintable, for indoor and outdoor use.​ Excellent for wooden windows, doors, frames, etc. High filling capacity. Fine structure with high thixotropy ensures very easy workability, sanding, and a smooth surface after sanding. Paintable. For indoor and outdoor use. The putty must not be used for filling areas that come into direct contact with food and drinking water.

Properties of wood putty:

• putty shade: light wood
• filling medium and larger imperfections
• on metal, steel, stone, concrete, wood
• excellent for wooden windows, doors, frames, etc.
• thixotropic
• high filling capacity
• very easy workability
• suitable for sanding
• paintable
• for indoor and outdoor use
• viscosity at 20 °C: pasty
• VOC - content: 2004/42/IIB (b) (250) < 250g/l

Processing of wood putty

Use of wood putty: 
ideal putty for wood with a high content of wood flour for filling wood, does not sink, well sandable and flexible.

Substrate for wood putty: 
wood, chipboard, solid wood, slats, and all wood products. The substrate must be clean, dry, load-bearing, free of rust, fats, and grease. Ideally sanded. Original coatings should be sanded down to the substrate. When used outdoors, treat the metal substrate with a universal primer.

Curing of wood putty:
The putty is cured with hardener in a weight ratio of 100 parts putty : 2 parts hardener. Excessive addition of hardener is undesirable. It may lead to blooming and a change in the color shade in the subsequent topcoat.

Processing time of wood putty:
3 to 4 minutes at +20 °C. The reaction temperature must not drop below +5 °C.

Application of wood putty:
by spreading.

Drying time and sandability of the putty
at +20°C approximately after 15 minutes against dust, sandable after 25 minutes.

Product safety warnings (H-statements)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H335: May cause respiratory irritation.
• H361d: Suspected of damaging the unborn child by inhalation.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.
• H413: May cause long-lasting harmful effects to aquatic life.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P303+P361+P353: IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water/shower.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P308+P311: IF exposed or concerned: Call a POISON CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day)
• P405: Store locked up.
• P501: Dispose of contents/container in accordance with local regulations.