As a primer and filling spray, it can be used without a primer coat, normally paintable with all common coating systems, also 2K and water-based, without the need for intermediate sanding. Max Color Rapid filler is acid-free, adheres to every surface, and is resistant to gasoline,
Product safety warnings (H-phrases)
- H222: Extremely flammable aerosol.
- H229: Container is under pressure: may burst when heated.
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long-lasting effects.
Precautions for safe handling (P-phrases)
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P103: Read label before use.
- P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- P211: Do not spray into an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
- P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
- P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
- P271: Use only outdoors or in a well-ventilated area.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P301: IF SWALLOWED:
- P303: IF ON SKIN (or hair):
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312: Call a POISON CENTER/doctor if you feel unwell.
- P330: Rinse mouth.
- P331: DO NOT induce vomiting.
- P337+P313: If eye irritation persists: Get medical advice/attention.
- P353: Rinse skin with water/shower.
- P361: Take off immediately all contaminated clothing.
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
- P501: Dispose of contents/container in accordance with local regulations.