Polykar Fiber two-component Putty for Metal and Fiberglass, 500 g

Putty with a high glass fiber content (6 mm), allowing for the creation of a very strong, glass-fiber-bound layer of putty that can be sanded as needed. Designed for filling particularly large areas or bridging weak or rusted spots and holes, especially suitable for metal surfaces or fiberglass. The putty should not be used for filling areas that come into direct contact with food and drinking water.

Application:
The surface must be free of rust and sanded with P80 sandpaper. The surface must be clean, dry, and free of dust and grease. For maximum anti-corrosive protection, use an epoxy or polyurethane primer first. Do not apply the putty over reactive, single-component, or nitrocellulose primers. It is applied with a spatula.

Hardening:
The putty is hardened with a hardener (PE-initiator, dibenzoyl peroxide, red paste in a tube) in a weight ratio of 100:2 - 100 parts of putty : 2 parts of hardener - recommended ratio for a temperature of 23 °C.

Processing Time:
The putty must be processed at a temperature of 23 °C and a hardening ratio of 100:2 within 5 minutes after mixing with the hardener. At temperatures below 23 °C (at least 17 °C), the processing time extends, while at higher temperatures, it shortens. By adjusting the hardening ratio, the effect of temperature on the processing time can be partially eliminated.

Hardening Ratio:
- at least 100:1 – extends the processing time
- at most 100:3 – shortens the processing time

Sanding:
The putty is sandable at a temperature of 23 °C and a hardening ratio of 100:2 within 25-35 minutes. For sanding, we recommend using a rotary or orbital sander and sandpaper P80-120.

Top Coatings
All common coating systems can be used on the putty. The putty withstands temperatures of 80 - 110 °C.

Cleaning Tools:
Soiled parts of tools can be cleaned with POLYKAR POLYESTER THINNER or nitro thinner C6000. Only uncured putty can be cleaned.

Product Safety Warnings (H-statements)

• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H361d: Suspected of damaging the unborn child through inhalation.
• H372: Causes damage to organs with prolonged or repeated exposure.

Safe Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P270: Do not eat, drink or smoke when using this product.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
• P308+P313: IF exposed or concerned: Get medical advice/attention.
• P405: Store locked up.
• P501: Dispose of contents/container in accordance with local regulations.