Polykar

For filling medium and larger unevenness. Intended for common substrates including cast iron, aluminum, zinc, and fiberglass. Well applicable and easily sandable, pore-free, usable for leveling unevenness in wood (harder types), laminate, concrete, etc.

Special filler with a high content of wood flour for filling solid wood, chipboard, slats, and all wooden products. Flexible, tough, and dimensionally stable (works with wood), does not sag.

A filler with a high content of fiberglass (6 mm), allowing for the creation of a very strong, fiberglass-bonded layer of filler that can be sanded as needed.

Special filler with a high content of wood flour for filling solid wood, particle board, laminated wood, and all wooden products. Flexible, tough, and dimensionally stable (works with wood), does not sink.

For filling medium and larger unevenness. Designed for common substrates including cast iron, aluminum, zinc, and fiberglass. Well applicable and easily sandable, pore-free, also usable for leveling unevenness in wood (harder types), laminate, concrete, etc.

A repaintable agent for the protection of vehicle underbodies and sills made from synthetic resins.

For filling medium-sized irregularities. Suitable for common substrates including cast iron, aluminum, zinc, and fiberglass. Excellent sanding properties, easy to apply, pore-free, and can also be used for leveling irregularities in wood (harder types), laminate, concrete, etc.

Special filler with a high content of wood flour for filling solid wood, particle board, laminated board, and all wooden products. Flexible, tough, and volumetrically stable (works with wood), does not sink.

Two-component polyurethane anti-corrosive filler for automotive repair and industry. In the coating system, it is intended to create a bonding layer between primary coatings or filled areas and the top coat.

Special filler designed for filling lightweight metals, galvanized sheets of bodywork and steel. Due to the high content of aluminum powder, it has a fine structure and good applicability, and is easy to sand.

DBPO paste - red PE initiator - hardener for polyester fillers. Reaction initiator for curing polyester fillers. Hardener for polyester fillers, hardener for acrylic fillers, hardener for clear lacquers, hardener for acrylic paints.

Polykar Bitumen cartridge, a product for protecting the underbodies of cars, trailers, and metal products, made of rubber and asphalt.

For filling medium and larger irregularities. Designed for common substrates including cast iron, aluminum, zinc, and fiberglass. Well applicable and easily sandable, pore-free, usable also for leveling irregularities in wood (harder types), laminate, concrete, etc.

Putty with a high glass fiber content (6 mm), allowing for the creation of a very strong, glass-fiber-bound layer of putty that can be sanded as needed.

For filling medium and larger unevennesses. Suitable for common substrates including cast iron, aluminum, zinc, and fiberglass. Well applicable and easily sandable, pore-free, usable for leveling unevennesses of wood (harder types), laminate, concrete, etc.

Fine filler for filling small unevenness, grooves, and pores. Designed for common substrates including cast iron, aluminum, zinc, and fiberglass.

For filling medium-sized unevenness. Suitable for standard substrates including cast iron, aluminum, zinc, and fiberglass. Excellent sandability, easy to apply, pore-free, usable for leveling unevenness in wood (harder types), laminate, concrete, etc.

Fine filling compound for filling small irregularities, grooves, and pores. Designed for common substrates including cast iron, aluminum, zinc, and fiberglass.

Two-component laminating set - includes resin, initiator, and glass fabric tape. For minor repairs of holes and cracks, or to bridge weak or rusted areas.

Polykar Bitumen spray, agent for the protection of car chassis, trailers, and metal products, made on a rubber and asphalt basis.

For filling medium-sized unevenness. For common substrates including cast iron, aluminum, zinc, and fiberglass. Excellent sanding properties, easy to apply, pore-free, also usable for leveling unevenness in wood (harder types), laminate, concrete, etc.

Spray filler designed to create an even layer of filler, which is needed before the application of the primer and subsequently the topcoat on automotive bodies and other metal surfaces and fiberglass superstructures and parts.

Quality single-component acrylic filler for automotive repair and industry. It has very good filling properties and excellent adhesion.

Anticorrosive preparation for the protection of closed profiles on automotive bodies based on synthetic wax resins.