Polykar Wood Two-Component Wood Filler, Sandable, 150 g

Special filler with a high share of wood flour intended for repairs of solid wood, chipboard and batten boards, and all wooden products. It excels in elasticity, toughness, and volumetric stability (works together with the wood) and does not sink. It is easy to sand while maintaining its elasticity. The material can be tinted before application or after it has cured.

The filler must not be used for filling toys, children's furniture, and places that come into direct contact with food and drinking water.

Application:
The filled surface of the wood must be free of moisture, dust, and old coatings and roughened with sandpaper. It is applied with a spatula. If a thicker layer of filler is needed, it is recommended to apply in several layers of about 5 mm. Wait at least 30 minutes between layers.

Curing:
The filler is cured with the hardener (PE initiator, dibenzoyl peroxide, white paste in a tube) in a weight ratio of 100:2 - 100 parts of filler to 2 parts of hardener – recommended ratio for a temperature of 23 °C.

Working time:
The filler must be processed at a temperature of 23 °C and a curing ratio of 100:2 within 6 minutes after mixing with the hardener. At temperatures lower than 23 °C (at least 17 °C), the working time is extended, while at higher temperatures it is shortened. Adjusting the curing ratio can partially eliminate the effect of temperature on working time.

Curing ratio:
- at least 100:1 – extends working time
- at most 100:3 – shortens working time

Sanding:
The filler can be sanded at a temperature of 23 °C and a curing ratio of 100:2 after 30 minutes. Coarse sanding starts with sandpaper P80-120 and is completed with finer paper as needed. It is recommended to use a rotary or vibrating sander for sanding.

Top Coatings:
Regular wood stains (water-based, alcohol-based...) can be applied to the filler. It is compatible with all standard coating systems.

Cleaning Tools:
Soiled working tools can be cleaned with POLYKAR POLYESTER SOLVENT or nitro thinner C6000. Only uncured filler can be cleaned.

Product Safety Precautions (H-statements)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H360f: May damage fertility.
• H372: Causes organ damage through prolonged or repeated exposure.

Safe Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P270: Do not eat, drink, or smoke when using this product.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of soap and water
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P308+P313: IF exposed or concerned: Get medical advice/attention.
• P405: Store locked up.
• P501: Dispose of contents/container in accordance with local regulations.