Polykar Wood Two-Component Wood Filler, Sandable, 500 g

Special filler with a high content of wood flour for filling solid wood, chipboard, slats, and all wooden products. Flexible, tough, and dimensionally stable (works with wood), does not sag. Well sandable while maintaining flexibility. The filler can be pigmented both before application and after curing.

The filler should not be used for filling toys, children’s furniture, and areas that come into direct contact with food and potable water.

Application:
The filled surface of the wood must be free of moisture, dust, and old coatings, and roughened with sandpaper. It is applied with a spatula. If a thicker layer of filler is to be created, it is recommended to apply in multiple layers of about 5 mm each. Wait at least 30 minutes between individual layers.

Curing:
The filler cures with a hardener (PE-initiator, dibenzoyl peroxide, white paste in a tube) in a weight ratio of 100:2 - 100 parts of filler : 2 parts of hardener – recommended ratio at a temperature of 23 °C.

Working Time:
The filler must be processed within 6 minutes of mixing with the hardener at a temperature of 23 °C and a hardening ratio of 100:2. At temperatures lower than 23 °C (at least 17 °C), the working time is extended; at higher temperatures, it is shortened. By adjusting the hardening ratio, the effect of temperature on the working time can be partially eliminated.

Hardening Ratio:
- at least 100:1 – prolongs the working time
- at most 100:3 – shortens the working time

Sanding:
The filler can be sanded after 30 minutes at 23 °C and a hardening ratio of 100:2. Coarse sanding starts with sandpaper P80-120 and finishes with finer paper as needed. It is recommended to use a rotary or orbital sander for sanding.

Top Coatings:
The filler can be stained with commonly available stains (water-based, solvent-based…). All common coating systems can be used on the filler.

Cleaning of Tools:
Soiled parts of tools can be cleaned with POLYKAR POLYESTER THINNER or nitro thinner C6000. Only uncured filler can be cleaned.

Product Safety Warnings (H-statements)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H360f: May damage fertility.
• H372: Causes damage to organs with prolonged or repeated exposure.

Safety Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P270: Do not eat, drink or smoke when using this product.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P308+P313: IF exposed or concerned: Get medical advice/attention.
• P405: Store locked up.
• P501: Dispose of contents/container in accordance with local regulations.