Polykar Wood two-component wood filler, sandable, 1.5 kg

Special filler with a high content of wood flour for filling solid wood, particle board, laminated wood, and all wooden products. Flexible, tough, and dimensionally stable (works with wood), does not sink. Well sandable while maintaining flexibility. The filler can be pigmented both before application and after curing.

The filler must not be used for filling toys, children's furniture, or places that come into direct contact with food and drinking water.

Application:
The filled surface of the wood must be free of moisture, dust, and old coatings and roughened with sandpaper. It is applied with a spatula. If a thicker layer of filler is needed, it is recommended to fill in multiple layers of about 5 mm. Wait at least 30 minutes between individual layers.

Curing:
The filler is cured with a hardener (PE initiator, dibenzoyl peroxide, white paste in a tube) in a weight ratio of 100:2 - 100 parts of filler : 2 parts of hardener – recommended ratio for a temperature of 23 °C.

Processing time:
The filler must be processed within 6 minutes after mixing with the hardener at a temperature of 23 °C and a hardening ratio of 100:2. At temperatures lower than 23 °C (minimum 17 °C), the processing time is extended, while at higher temperatures it is shortened. By adjusting the hardening ratio, the influence of temperature on processing time can be partially eliminated.

Hardening ratio:
- at least 100:1 – extends the processing time
- at most 100:3 – shortens the processing time

Sanding:
The filler is sandable at a temperature of 23 °C and hardening ratio of 100:2 after 30 minutes. Coarse sanding begins with sandpaper P80-120 and is finished as needed with finer paper. For sanding, it is recommended to use a rotary or vibrating sander.

Topcoats:
The filler can be stained with commonly available stains (water-based, alcohol-based…). All common coating systems can be used on the filler.

Cleaning tools:
Dirty parts of the tools can be cleaned with POLYKAR POLYESTER THINNER or nitro thinner C6000. Only uncured filler can be cleaned.

Product safety warnings (H-phrases)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H360f: May damage fertility.
• H372: Causes damage to organs with prolonged or repeated exposure.

Safety handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P260: Do not breathe dust/fume/gas/mist/vapours/aerosols.
• P270: Do not eat, drink or smoke when using this product.
• P280: Wear protective gloves/clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P308+P313: IF exposed or concerned: Get medical advice/attention.
• P405: Store locked up.
• P501: Dispose of contents/container in accordance with local regulations.